Chambers | 3.4.6.8 |
Heat source | Thermal oil . steam. |
Martial | Steel |
Working width | 2200 2400 2600 2800 3000 3200 |
Layers | 3 or 5 |
GHHG2800-3 three pass tensionless dryer is used for tubular fabrics and open width fabrics drying,suitable for cotton,blender and polyester.
Drawing design :
Machine Usage:
l GHHG2800-3 three pass tensionless dryer is used for tubular fabrics and open width fabrics drying,suitable for cotton,blender and polyester.
l During drying,the fabrics are being supported by the net belts allthe time,upper and lower nozzles are blowering,the fabrics are moving in wave form,after several times vibrating and beating,the moisture will be evaporated,and the fabrics are dried gradually.
l During the whole drying process,the fabrics are in relax status,release the inside tension force fully,after preshinking and setting to reach the ideal results
l The machine has four heating method: Steam,oil,directly natural gas and indirectly natural gas. Please indiate before order.
Mainly technical parameters:
Nets layerx width | 3X 2800mmï¼width is changableï¼ |
Mechanical speed | Two chambers dryer : 2ï½20m/min Four chambers dryer: 3ï½30m/min Six chambers dryer: 5ï½45m/min |
Infeed mode | Tubular fabrics can be infeeded in multi tubes,while open width fabrics only can be infeeded in single tube. |
Heating method | steamãthermal oilãnatural gas |
Max.working temperature of hot air ï¼ | Steam 130âï¼thermal oilãnatural gas 150â |
Machine normal working consumption | Steam 150ï½200kg/hour.chamber Thermal oil: 70000-100000kcal/hour·chamber Natural gas 8-12m3/hour·chamber |
Each chamber evaluating amount | 140â180kg/hour·chamber |
Drying chamber length | 2.1m/chamber |
Each chamber fabrics length | 6.3m/chamber |
Insulated panel thickness | 105mm |
Net material | Glass fiber PTFE coating |
Drive control | 11.15 KW PLC+inverter |
Hot motor | 22KW/chamber inverter |
Dust exhaust motor | twoãfour chambers 1X2.2KW inverter Six chambers 2X2.2KW inverter |
Drying chamber hot air delivery mode | Upper and lower nozzle interlaced blowing |
Machine Dimesion(LX WX H)ï¼ | Two chambers Tell Us What You NEED |