Brief Description:
extruding plastic sheet, rod and mould material, with good toughness, high impact, high strength, strong rigidity, rub resistance, good thermal stability and creep resistance, which can replace metal partly.
SGS certified.
Feature:
1) Exnt mechanical strength;
2)High hardness strength;
3)High wear resistance;
4)Self-lubrication;
5)Higher modulus;
6)Chemical resistance and etc.
Specification:
1. Customized / OEM size & shape; 2. Sharp point (pensil) or tube/circle; 3. With thread inside or as request; 4. Good quality.
Detail Description:
Test Item | Test condition | Test method(ASTM) | Units | Test Data |
Water absorption | 23°C60%RH | ASTM D-570 | % | 022 |
Melt flow rate | - | ASTM D-1237 | g/10min | 9 |
Mold shrinkage | Transverse | - | % | 20 |
Specific Gravity | - | ASTM D-792 | g/cm3 | 1.41 |
Tensile strength | 1.6mm | ASTM D-1822 | KJ/m2 | 98 |
Elongation | 23°C | ASTM D-638 | % | 50 |
Tensile strength | 23°C | ASTM D-638 | MPa | 62.3 |
Flexural strength | 23°C | ASTM D-790 | MPa | 91.2 |
Rockwell hardness | - | ASTM D-785 | M scale | 80 |
Notch impact strength(Izod) | 3.2mm | ASTM D-256 | J/M | 54 |
Flexural modulus | 23°C | ASTM D-790 | GPa | 2.62 |
Tearing strength | 2mm | ASTM D-732 | MPa | 54.9 |
Melting point | 10°C/min | ASTM D-3418 | °C | 225 |
Flammability | - | UL94 | - | HB |
Ralated Picture: