Inner ring | 110.000mm |
Outer ring | 240.000mm |
Width: | 80.000mm |
Chamfer | 3 |
Basic Dynamic Load Rating | 761KN |
Asic Static Load Rating | 10620KN |
Limited Speed (rpm) | 1728(grease)/2240(oil) |
Gross Weight | 18.1kg |
Srical Roller BearingPart No.:22322Inner Ring: 110.000mmOuter Ring: 240.000mmWidth: 80.000mmChamfer: 3Basic Dynamic Load Rating: 761KNBasic Static Load Rating: 1062KNLimited Speed (rpm): 1728(grease)/2240(oil)Gross Weight: 18.1kgBrass CageSrical roller bearing consists of an outer ring with srical raceway and an inner ring with double-raceway, one or two cages, and one group of srical rollers. Due to the center of srical raceway of outer ring which is coinciding with the center of bearing, this makes it have a self-aligning capability. If there is a deflection of the shaft or housing or misalignment of their axes, it is automatically corrected the excessive force which is not applied to bearings. Srical roller bearing has a high load carrying capacity for radial load and axial load in two directions. Srical roller bearing is especially suitable for carrying heavy loads and impact loads, but this type of bearing permits a lower limiting speed. The permissible aligning angle of the srical roller bearing working in normal conditions is 1°~2.5°. If bearings of this type have seals, then this function would be reduced.Multiple cage designs are available.Srical roller bearings with hardened steel cages deliver greater fatigue strength, increased wear-resistance and tougher protection against shock and acceleration.Srical roller bearings with brass cages provide extra strength and durability in the most unrelenting conditions, including extreme shock and vibration, high acceleration forces and minimal lubrication.Srical roller bearings are available with a cylindrical bore for cylindrical type mounting, a tapered bore for tapered type mounting. To order tapered bore srical roller bearing, add the suffix âKâ ( 1:12 ) or âK30â ( 1:30 ) to bearing (e.g., 23152K, 24172CAK30).An oil groove and holes are provided in the outer ring to supply lubricant and the bearing are suffixed âW33â.