Christian Supplier Tyre Pyrolysis System TO Crude Oil

• Huayin is specializing in manufacture waste tyres pyrolysis plant, waste plastics pyrolysis plant and oil distillation plant.
• 20 Years experience in this field.
• Have running plant factory, welcome to visit us.
• Green technology, no pollution, turn waste into wealth.
• Help you choose the best and profitable machine.
• Send experienced engineer instruct you install the machine, and help you training your workers..

Input: used whole tyres, shred tyres

Output: 45%-50% crude oil, 30% carbon black, 15% steel >

Heating material: coal / wood / fuel oil / natural gas

Machine cover area: usually 400 square meters

Reactor material: Q345R Boiler plate

Crude oil: Oil from this machine can be used as industrial fuel for burning.

Carbon black: First,Carbon black from this machine is crude. You can sell it to the brick

factory as internal combustion or to the factory which need it as raw materials, such as shoe,

tire, cable and sealant companies. Second, could make further process, make carbon black

powder into carbon black briquette, use it for burning.

Steel strong> It can be sold to the iron and steel company directly

Auto-feeder load the whole waste tires into reactor, seal the reactor and heat the reactor by

burning the fuel(coal,wood,natural gas,oil) in the combustion system.

There is a thermocouple installed the oil gas outlet to test the oil gas temperature,when

thermocouple show certain temperature, the oil gas will come out, then go through the

cooling system to become to oil.

At same time,there are some gas(CH4,C2H6,C3H8,C4H10 and H2) can not be cooled under normal pressure,they will be

recycled back to combustion system to burn as energy.

The dust and sulfur gas will be removed by the dust removing system.

After the oil gas run out, there are slag(carbon black) inside of the reactor, HUYAYIN use the automatic discharging system to

remove it.

Then HUAYIN use auto-feeder to remove the tire ually the 10 tons capacity need about 20 hours to

finish the whole process.

2 hours for loading 10 tons waste tires

2 hours for preheating the reactor

8-10 hours for the tire become gas and cooling become oil

3 hours for cooling the reactor and discharging the carbon black

1 hours for removing the tires steel

It will including four parts: water, slag, gas, noise

Water include two parts, cooling water and de-dusting chemical water.

Cooling water, just temperature higher, no pollution.

Slag, it is by-product, we can also called it carbon black. Above has

mentioned the usage, please check it.

Gas include two parts, exhaust gas and smoke dust. Exhaust gas is Methane,

Ethane...these kind of gas are every easy to burning, here we make a special

design could recycling it into fire furnace, heating the reactor. Smoke dust, it

is generated from burning coal / wood. Through de-dusting system, it could

meet the emission standard of national requirement.

Noise: under 75db.

Safety devices

Our machine equiped with anti-clogging device, pressure gauges, alarming

system, safety valves, negative pressure device(vacuum device), oil-water

separator.

Usually our machine is working under normal or negative pressure. In case

of congestion, cause pressure, alarming system will ring, if no response from

workers, safety valve could release pressure automatically.

Negative pressure device could make sure our machine working under negative

pressure, more safety.

Oil-water separator could avoid oil gas go back to reactor, cause explosion.