I Equipment FeatureThis machine adopts the technology of double-drive double-roller-extruding, and the product is formedonce after sizing, material feeding, spreading no-woven cloth, compounding and repressing. The equipment runs stably withhigh automatic degree, and the specification of its product can be adjusted arbitrarily. II Project Feature1. The source of the production raw materials is widely with no regional restriction.The product is madeof sawdust, straw (rice hulls), many kinds of crop straw and inorganic material (such as talcum powder, infusorial earth and powder coal ash) after special technology. So this project have low production cost, small investment and fast effectiveness.2. The equipment has high automatic degree, simple production technology, low labor intensity and production there is no noise and three wastes (waste water, waste gas and waste residue) during production.3. Low production energy consumption. With the influence of chemical reaction, it can meet the requirements about production technology without high temperature and high pressure.III.Product Feature and Performance
| 1 | Air-dry density | ≤ (Standard index)50kg/m2 | (Test Value) 30.0kg/ m2 |
| 2 | Drying shrinkage rate of the board | ≤0.08% | 0.015% |
| 3 | Anti-breaking load | ≥1400N | 5640N |
| 4 | Anti-impact | No breakage nomenon such as cracking after three impacts | No breakage nomenon such as cracking after three impacts |
| 5 | Thermal resistance of main section (T=90mm) | ≥1.35(m2.k)/w | ≥1.36(m2.k)/w |
| 6 | Thermal bridges area ratio | ≤8% | 2.22% |
| 7 | Sound insulation Index | | 36dB |
| 8 | Radioactivity | | None |
IV.Wall Board Feature1. Anti-earthquake with light quality:In view of its weight per unit area is only 1/10 of red brick wall, the product has good anti-earthquake performance. It can be used at low-rise building and high-rise building, and it is preferred to be usedat workshop with steel frame structure. It can replace the color steel plate with its better performance.2. Fast and convenient operation:It can be installed by board or combination with the dry method, and the product can be nailed, cut, planed, drilled and sticked. 3. Low comprehensive cost:The product is made of agricultural and industrial wastes, so the production cost is low. With the lowload of girder and short construction period, it can reduce over 20% of engineering cost after compared with solid brick and hollow brick.4. Energy-saving and environmental protection:The production processing need no high temperature and high pressure. Being a green environmental-protection energy-saving building materials, the product has no m, pollution and radioactivity.5. Increasing the usage area:Under the same condition of heat-preserving and sound insulation, with the thinner plate, the productcan increase over 10% usage area after compared with the same building.6. Having the following features:fireproofing, water-proof, anti-impact, acid & alkali resistant and anti-aging. V.Production ConditionsWall board production workshop and raw material warehouse. Workshop: over 300m2-800 m2, worker: 10-16 person; fresh water; electricity:8-20KW VI. Benefit Analysis(I) Cost accountingRaw material: 19-25 Yuan/ m2 (according to different thickness); Wage: 1 Yuan/ m2Water-electricity fee: 0.5 Yuan/ m2; Depreciation of the equipment: 0.2Yuan; Management fee: 1 Yuan/ m2Total: 21.7 Yuan~27.70 Yuan/ m2(II) Profit analysis: (Take the small-scale equipment as example)production: 800 m2 per day, at the price of 58 Yuan/ m2 to sell, and then the profit per day is that800 m2 ×58 Yuan/ m2-800 m2×21.7~27.70=29040~24240 Yuan.VII.Services1)Fully life-cycle value servicesOur company provides mgo board production gn ,cost accounting,installation and operation,equipment maintenance and the whole life cycle techincal support2)all-around thechnical serviceWe provide technical formula for clients,to help clients to occupy the leading position in the market.3)complete data specificationProvide production pment technical data and instructions,and provide the mgo board production ula.4)quality commitmentThe company regards product quality as the lives of enterprise,the main components and wearing parts are made of high quality wear-resistant materials and advanced processing technology,so that the equipment endurable and wear resisting ,wearing parts warranty for one year.
