Packing: | Hanging position in wooden box. Seaworthy wooden cases made of free-fumigated material. |
Application: | Bottle Label |
Packaging Label Foil
Description
1. The foil needs to be plain, free from streaks, unevenness wrinkles, scratches, cracks, rust residuals, oil spots, oxidation and stains or from any other defects.
2. The end face of the foil roll should be plain, no edge warping and bruise.
3. Splices will be ultrasonically welded and well visible marked at the flange a couple of layers before the joint. Strength of the weld at the seam to be min. 80% of the foil strength.
4. The uncoiling length in the adhesion experiment: the uncoiling length is less than1.0 m.
Thicknessï¼0.009-0.0105mm
Alloyï¼ 8011-O
Widthï¼300-800mm
Coreï¼150/152 steel core
Propertyï¼tensile strength≥80MPaï¼elogation≥2.5%
Surface wetting tensionï¼A grade
Pineholeï¼ ≤50/m²