Product Introduction
1. Name: straight pulling roller
2. Brand: Changlan
3. Type: HCL180
Cable pulling roller is a machine used in the cable laying process, which can support cable and reduce pulling force.
With these tools, cable will not the ground which can protect cable outer sheath.
Product descriptions:
1. In the cable laying process, it can support the cable and change the sliding friction into rolling friction between cable and support, which means it can reduce pulling force.
2. Straight pulling roller is used in the straight ent of cable laying. Generally put one roller every 2-3 meter.Â
3, Corner pulling roller is used in the turning point of cable laying. The amount of corner pulling roller in the turning point is determined by the side pressure and cable bending radius.
Usually used in laying path of cable tray, well head, upper and down slope and control cable.
Notes: When operating, the roller should be fixed in ground or other supports.
HCL-180 straight pulling roller
 Straight pulling roller is used in the straight ent of cable laying. Generally put one roller every 2-3 meter.Â
Technical data
description
type
suitable cable diameter (mm)
dimensions(mm)
net weight(kg)
straight pulling roller
HCL-120
Φ120 and below
375x220x194
4
HCL-180
Φ180 and below
440x328x256
12
corner pulling roller
ZCL-120
Φ120 and below
530x318x316
13
ZCL-180
Φ180 and below
690x439x430
26.5
annular pulling roller
WX-150
Φ50-Φ150
458x210x402
13.5
WX-180
Φ50-Φ180
536x257x486
22