Auto-Calibrate Finger Touch Interactive Whiteboard with Powerful Education SoftwareFinger Touch FT6 includes the emitter and interactive sensor. Emitter can be installed on a flat surface. It emits infrared laser curtain on the surface which is about 1mm thick invisible light and parallel with the projection screen surface, 1-2mm above the screen surface. When the fingers or any non-transparent objects touch this virtual surface, the light will be reflected and detected by the interactive sensor. Computer will figure out the position of the mouse by accurate calculating the reflected light position.
Feature:
Support 100-point finger touch at the same time;150inch screenLight weight (The main parts include laser emitter and with a total weight of no more than 500 grams) Auto-calibration, complete within 5 seconds, the success rate of more than 98%.Competitive priceThe shortest throw ratio: 0.25, you can freely adjust the required screen size, very flexible.
Installation:FT6 is small and easy to install. It doesn't require professional technology to install.Just install the laser emitter in the middle area above the whiteboard (or flat surface) and put the on the projector.Step by step guided video:Advantages:
High cost performance:1. Compared with LCD electronic whiteboards, FT8 is more cost-effective to pay for the product, installation and maintenance. And the user can enlarge or reduce the projection screen according to the demand. The LCD Whiteboard does not have this feature.Stable performance, not easy to damage: FT8 interactive whiteboard external circuit only power supply nterface circuit, eliminating the data exchange circuit of the LCD panel, and reducing the information processing d for the display screen. It uses the PCB board to concentrate the circuit on the circuit board, Reduces failure while reducing power consumption. Good compatibility: FT8 whiteboard is compatible with various software.High stability:Through a variety of anti-abnormal spot interference algorithms and filter push-pull devices, the system is not easily affected by the external environment like light and temperature, even if there are small bugs or dust stuck on the board products can also operate normally.Full-screen touch:The projection screen can realize full-screen touch. Five seconds to complete automatic positioning. Infrared and optics can only be manually positioned. FT8 auto-calibration is more precise and the operation is easier.Supports 100-point finger touch (100 people write at the same time and support Windows drawing software 100 points).The projection area works as a touch panel for windows touch.Max projection Screen:Support 40 - 150inch(Non-sunlight room)Portable and Movable: The total weight of whole set is only 500 grams. The installation is simple and convenient. Simply fix the laser emitter with screws or suction onto the above projection screen, and fix the to the projector or other object with double-sided tape or a fixed bracket. The entire process does not require expertise and anyone can install it.Easy installation and debugging: Through two well-designed adjustment knobs complete light adjustment.(camera) Integrated positioning software: Connect to another computer of the same resolution as the computer, without calibration positioning to operate, which saves the positioning time and makes it easier to use.Small size:Small laser emitter(size:16.5cm*2.5cm* 3.6cm),Can be directly adsorbed on the surface of the white board.ction:transmission between camera and laser emitter. The camera automatically controls the opening and closing of the laser emitter through ls, which greatly increases the lifetime of the laser emitter.Transfer normal whiteboard and wall into finger touch screen:FT8 can transform any whiteboard or wall into a finger touch screenAny opaque object can be used as a stylus in the interactive area.Support dual screen splicing(Support extended screen splicing, fusion splicing, hard splicing):The fusion process is performed at the screen splicing, and writing with the finger at the splicing area is still very smooth.
Factory IntroductionOway Group Limited, We are profesional manufacturer,Established in 2009 , Factory locates in Dongguan city, Guangdong province, ChinaMain products: portable interactive whiteboard receiver and pens, finger touch smart boards, infrared IR pens, interactive modules for projectorsOutput data gets 30000 sets per year of various models since 2013.
Why Choose Us1. OEM/ODM ServiceOur professional R&D dept. can develop different products for different target prices and different requirements.2. Free sample serviceSamples can be free.Return the money of sample in next quantity order.3. Direct factory, Competitive priceWe are manufacturer.Factory price, various products we can source for you.4. Quality controlWe have a strict quality control system, Professional QC team. Each product will be tested and packed well before delivery.5. Custom packaging serviceNo matter the inner packing or the outer carton.We can design as your request.6. Warranty & Fast ResponseWe provide 3 years warranty for hardware, 1year for the pens, and software is free for lifetime. All requests will be reply within 12 hours.Welcome Us Any Time Company Name: Oway Group LimitedMiss CandyMobile 1121 Welcome to visit our company web site
