GF Type Oil Water Separator Tubular Centrifuge For VCO Virgin Coconut Oil
Virgin Coconut Oil (VCO) is growing in popularity as functional food and as a medicine . The publicawareness of it is increasing.The demand for VCO in the international market has increased is expected thut VCO will experience a dramatic growth in the future market Virgin coconut oil is thenaturally processed, chemically free and additive free product from fresh coconut meat or its derivatives,which has not undergone any chemical processing or any heat processes
GF Tubular Centrifuge Separator is used for separating various kinds of liquids that are difficult to be separated, especially suitable for liquid-liquid separation and liquid-liquid-solid separation.
It is a highspeed centrifuge with strong separating capacity. The bowl of the centrifuge rotates around its axis and forms a strong centrifugal force, the centrifugal force separates the suspensions into liquids and solid.
The suspension is fed through the bottom into the hollow cylindrical rotor which has two outlets at the top to allow the discharge of the separated liquids. The lighter liquid and the heavier liquid will flow out from the respective liquid outlets. At the same time the solids are deposited on the bowl's wall and the accumulated solids are cleaned out manually from the bowl when the centrifuge is shut down.
The parts with the material is made of stainless. The machine body can be stainless or iron casted with painting according to the material to be separated or the requirement of the customer.
The capacity of the tubular centrifuge separators is from 10L/h to 3000L/h depending on the different type of the tubular centrifuges and the density of the mixture to be separated.
The clarifying type of tubular centrifuge is designed to separate low percentages of solids between 1 and 0.001 microns in size which are suspended in a liquid. The high centrifugal force generated causes the solids to migrate to the wall of the centrifuge tube where they are retained. The clarified liquid is the discharged at the top of the tube.
The separating type of tubular centrifuge is designed to separate two (2) immiscible liquids of differing densities. The high centrifugal force generated causes the high density liquid to migrate toward the tube wall while the lower density liquid is displaced to the center of the tube. The separated liquids are then discharged at the top of the tube with dedicated outlets.
The separating type of tubular centrifuge to separate three (3) se solutions. If any solids are present they will collect on the wall of the centrifuge tube while the two (2) separated liquids are discharged at the top of the tube by the dedicated outlets.
Technology parameter
Item | GF105 | |
Drum | ID(mm) | 105 |
| Height (mm) | 730 |
| Sedimentation volume(L) | 6 |
| Max speed(r/min) | 19000 |
| Max separation factor | 21000 |
| Inlet nozzle diameter (mm) | 4/6/8 |
| Material inlet pressure (Mpa) | ≥0.05 |
| Capacity (water capacity)L/H | 1600 |
| Actually Capacity L/H(For coconut oil) | 120-180 |
Motor model | 3 se two pole motor | |
Motor power (kw) | 2.2 | |
Machine dimension (mm) |
Signup today to claim your Discount. Get Started
before it's too late! | |
