Premium Portland Cement Clinker / Type II and I For Cement Production And Construction

Origin: Thailand
Supply Type: oem service
Processing Time: 5 Days

Supplier Info.

Company Name B.S.M TRADING CO.,LTD
Membership:
Business Type: Manufacturer, Trading Company, Buying Office, Agent, Distributor/Wholesaler, Government ministry/Bureau/Commission, Association, Business Service (Transportation, finance, travel, Ads, etc), Other

Employees Total
Annual Revenue

We had exported cement of all kinds from 32.5 - 42.5 - 52.5. We do know that your esteemed company is a big company and you are looking for long term partnership in Vietnam for cement supply. We had export our cements (in bulk, in 40 kilo, 50 kilo and jumbo bag, container etc., ) directly or via oversea partners

We hope to have chance to cooperate with you and your esteemed company in supplying cement and other building materials to oversea markets for our mutual benefits.

II.Â CEMENT STANDARD

Â 1.Vietnam standard (TCVN)

- Quality of Cement as per TCVN 6260 - 2009

2. European standards (EN)

- Certificate I -EN 197-1.2000- CEM II 42,5 R

- Certificate II - En 197-1.2000 CEM II 42,5N

- Certificate III - EN 197-1.2000 CEM I 42,5R

Â 3. American standards (ASTM)

- ASTM C150 TYPE-1

- ASTM C1157 TYPE- GU

- ASTM C1157 TYPE- HE

SPECIFICATIONS FOR ORIDINARY PORTLAND CEMENT AS PER EN 197-1:2011/CEM I 42.5
Â	Â	Â	Â	Â	Â
Items	CHARACTERISTICS	Units	SPECIFICATION LIMIT	TEST RESULT	TEST METHODS
Items	CHARACTERISTICS	Units	SPECIFICATION LIMIT	TEST RESULT	TEST METHODS
1	SiO2Â	%	â‰¤ 26.00	23.41	EN 196-2
2	Al2O3Â	%	â‰¤ 6.50	5.5
3	Fe2O3Â	%	â‰¤ 4.50	3.6
4	CaO	%	â‰¥ 54.00	57
5	MgO	%	â‰¤ 5.00	2.75
6	SO3	%	â‰¤ 3.5	2.56
7	Loss on Ignition, (LOI)	%	â‰¤ 10.00	7.00
8	Insoluble Residue	%	â‰¤ 12.00	6.00
Â	sical and Mechanical Properties
Â	Finess test	Â	Â	Â	Â
1	Â Â Blaine	cm2/g	â‰¥ Â 3200	3800	EN 196-6
2	Retained content on sieve 75mm	%	< 15.0	0.1	EN 196-6
Â	Time of setting	Â	Â	Â	Â
1	Initial set	Minutes	Â Â â‰¥ Â 75	145	EN 196-3
2	Final set	Minutes	< 420	200	EN 196-3
3	Soundness (LeChatelier)	mm	< 10.0	1.0	EN 196-3
Â	Compressive strength	Â	Â	Â	Â
1	2 Days	MPa	â‰¥ 20.0	23.0	EN 196-1
2	3 Days	MPa	Â	27.0
3	7 Days	MPa	Â	37.0
4	28 Days	MPa	â‰¥Â 42.5	50.0

1)Grade:Â WHITEÂ CEMENT 42.5

(2)ChemicalÂ analysis:

CHINAÂ STANDARDÂ GB2015-91Â P.Â W42.5
Items/Â Indexes		NationalÂ Standard
CementÂ MgOÂ (%)		Â 4.5Â MAX
CementÂ SOÂ 3Â (%)		3.5Â MAX
CementÂ lossÂ onÂ ignitionÂ (%)		5.0Â MAX
CementÂ finenessÂ (%)		10.0Â MAX
SettingÂ timeÂ (min)		Â 45Â MIN
FinalÂ settingÂ time		600Â MAX
BrightÂ white		80%Â MIN
Â Â Â Â Strength(MPa)	3-dayÂ compressiveÂ strength	24.0Â MIN
	3-dayÂ bendingÂ strength	4Â MIN
	28-dayÂ bendingÂ strength	6.5Â MIN
	28-dayÂ bendingÂ strength	42.5Â MIN

15 types of cement which our company do produces and supplies

Cement is a binding material which makes a bond between aggregates and reinforcing materials together. With the development of technology, quality and types of cement have also developed. So there are different types of cement for different construction works.

Types of Cement

Cement is mainly classified into two categories depending on the hardening and setting mechanism. These are-

Hydraulic Cement

Non-hydraulic Cement

Along with these main types, depending on the composition and characteristics there are many types of cement.Â Followings are the other cement types:

Ordinary Portland Cement (OPC)

Portland Pozzolana Cement (PPC)

Rapid Hardening Cement

Quick Setting Cement

Low Heat Cement

Sulte Resisting Cement

Blast Furnace Cement

High Alumina Cement

White Cement

Colored Cement

Air Entraining Cement

Expansive Cement

Hydrobic Cement

Nomenclature Differences

In the US, three separate standards may apply depending on the category of cement. For portland cement types, ASTM C150 describes: Cement Type Â Â Â Â Â Description Type I Â Â Â Â Â Â Â Â Â Â Â Normal Type II Â Â Â Â Â Â Â Â Â Â Moderate Sulfate Resistance Type II (MH) Â Â Â Â Â Â Moderate Heat of HydrationÂ (and Moderate Sulfate Resistance)Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Type III Â Â Â Â Â Â Â Â Â Â High Early Strength Type IV Â Â Â Â Â Â Â Â Â Â Low Heat Hydration Type V Â Â Â Â Â Â Â Â Â Â High Sulfate Resistance

For blended hydraulic cements â€“ specified by ASTM C595 â€“ the following nomenclature is used:

Cement Type Â Â Â Â Â Description Type IL Â Â Â Â Â Â Â Â Â Â Portland-Limestone Cement Type IS Â Â Â Â Â Â Â Â Â Â Portland-Slag Cement Type IP Â Â Â Â Â Â Â Â Â Â Portland-Pozzonlan Cement Type IT Â Â Â Â Â Â Â Â Â Â Ternary Blended Cement

In addition, some blended cements have special performance properties verified by additional testing. These are designated by letters in parentheses following the cement type. For example Type IP(MS) is a portland-pozzolan cement with moderate sulfate resistance properties. Other special properties are designated by (HS), for high sulfate resistance; (A), for air-entraining cements; (MH) for moderate heat of hydration; and (LH) for low heat of hydration. Refer to ASTM C595 for more detail.

However, with an interest in the industry for performance-based specifications, ASTM C1157 describes cements by their performance attributes:Â Cement Type Â Â Â Â Description Type GU Â Â Â Â Â Â Â Â Â General Use Type HE Â Â Â Â Â Â Â Â Â High Early-Strength Type MS Â Â Â Â Â Â Â Â Moderate Sulfate Resistance Type HS Â Â Â Â Â Â Â Â Â High Sulfate Resistance Type MH Â Â Â Â Â Â Â Â Â Moderate Heat of Hydration Type LH Â Â Â Â Â Â Â Â Â Low Heat of Hydration

Cements

Portland cement CEM I

Portland cement CEM I 42.5 N

Portland cement CEM I 42.5 R

Portland cement CEM I 52.5 N

Portland cement CEM I 52.5 R

Portland cement CEM I 52.5 R (fc) â€“

Portland cement CEM I 52.5 R (ft)

Portland-composite cement CEM II

Portland limestone cement CEM II/A-LL 32.5 R

Portland limestone cement CEM II/A-LL 42.5 N

Portland limestone cement CEM II/A-LL 42.5 R

Portland-composite cement CEM II/B-M (S-D) 52.5 N â€“Â

Blast furnace cement CEM III

Blast furnace cement CEM III/B 42.5 N-LH/SR

Product Specifications

Characteristics	Unit	Specification EN 197-1.2011/ CEM I/ 42.5N	Result	Test methods
Compressive strength	Mpa	Â	Â	EN 197-1
After 2 days		â‰¥ 10	21.8
After 7 days		Â	34.8
After 28 days		â‰¥ 52.5	47.8
Setting time:	Â	Â	Â	EN 196-1
- Initial time	Min	â‰¥ 45	120
- Final time	Min	â‰¤ 420	170
SiO2	%	Â	21.44	EN 196-3
Al2O3	%	Â	5.08	EN 196-4
Fe2O3	%	Â	3.06	EN 196-5
CaO	%	Â	58.58	EN 196-6
MgO	%	â‰¤ 5	2.46	EN 196-7
SO3	%	â‰¤ 5â‰¤ 3.5	2.03	EN 196-2
Loss on Ignition (LOI)	%	â‰¤ 5	4.75
Insoluble Residue (IR)	%	â‰¤ 5	2.93
Cl- content	%	â‰¤ 0.1	0.02

Clinker 1-525 (M500) Standard Tests

The following table contains standard tests for Clinker 1-525 (M500).Â

Clinker 1-525 (M500)
Component	Â standard	test result
SiO2	-	22.50 %
Al2O3	-	5.50 %
Fe2O3	-	3.46 %
CaO	-	65.46 %
MgO	<5	1.10 %
SO3	<3.5	0.31 %
Insoluble Residue	<0.70	0.25 %
Loss On Ignation	<3.00	0.30 %
K2O	-	0.60 %
Na2O	-	0.35 %
Free CaO	-	1.20 %
Liter Weight	-	1250 g/lit
Lime Saturation Factor (LSF)	-	91.25 %
Silica Modulus (SM)	-	2.51 %
Alumina Modulus (AM)	-	1.59 %
C3S	-	53.55 %
C2S	-	24.11 %
C3A	-	8.72 %
C4AF	-	10.53 %