specification | ã 1 pole electromechanical relayScrew terminal and screwless terminal35 mm rail (EN 60715) mounting | ã Leakage current suppression1 pole electromechanical relayScrew terminal and screwless terminal35 mm rail (EN 60715) mounting
| |
configuration | 1CO(SPDT) | 1CO(SPDT) | |
Rated current/Maximum peak current A | 6/10 | 6/10 | |
Rated voltage/Maximum switching voltage VAC | 250/400 | 250/400 | |
Rated load AC1 VA | 1500 | 1500 | |
Rated load AC15(230V AC) VA | 300 | 300 | |
Single se motor rating(230V AC) Kw | 0.185 | 0.185 | |
Breaking capacity DC1:30/110/220V A | 6/0.2/0.12 | 6/0.2/0.12 | |
Minimum switching load mW(V/mA) | 500(12/10) | 500(12/10) | |
Standard material | AgNi | AgNi | |
Coil specification | |||
Nominal voltage (UN) V AC/DCV ACV DC | 12-24-48-60-(110â¦125ï¼-(220â¦240)** | (110â¦125) | â |
(230â¦240)* | â | (230â¦240) | |
6-12-24-48-60 (non polarized) | â | â | |
Rated power AC/DC VA(50Hz)/W | 1/1 | 0.5/â | |
Operating range AC/DCACDC | (0.8â¦1.1)UN | (94â¦138)V | â |
(184â¦264)V | â | (184â¦264)V | |
(0.8â¦1.2)UN | â | ||
Holding voltage AC/DC | 0.6 UN / 0.6 UN | 0.6UN/0.6UN | |
Must drop-out voltage AC/DC | 0.1 UN / 0.05 UN | 44 V | 72 V |
Technical data | |||
Mechanical life AC/DC cycles | 10 · 106 | 10 · 106 | |
Electrical life at rated load AC1 cycles | 60 · 103 | 60 · 103 | |
Operate/release time | 5/6 | 5/6 | |
Insulation between coil and (1.2/50 µs) | 6 (8 mm) | 6 (8 mm) | |
Dielectric strength between open | 1000 | 1000 | |
Ambient temperature range(UNâ¤60V/>60V) â | â40â¦+70/â40â¦+55 | â/â40â¦+55 | |
Protection category | IP 20 | IP 20 |