| Filling accuracy | ＜0.5% |
| Minimum liquid addition | 15μL |
1. This product is specially designed for filling. It can reduce the error between channels and realize arbitrary adjustment of filling volume, and make flow compensation with automatic adjustment system.
2. High definition LCD (3.5 inch) shows all the parameters at the same time, and an all-new interface that makes setup and operation easier than ever.
3. Using "double CPU" control, drive and control are separated, accurate one-key filling let repeating precision up to ± 0.3%. It can be widely used in the production timing and quantitative transmission.
4. Featured dispensing and transmission working mode and including three kinds of dispensing mode-timed dispense, copy dispense, volume dispense. Suck back angle can be set arbitrarily within 720 degree.
5. The flow rate can be calibrated; Start/stop/reverse are available; Full speed can purge the tubing rapidly.
6. These precision drives offer analog remote control options such as capacitance sensor, liquid level sensor, toelectric sensor and foot switch -ideal for automated process applications.
7. Using the stepper motor to control speed, high precision and is not affected by the change of load, large torque, low power consumption, strong adaptability.
8. Exnt driving circuit performance, good heat dissipation, low noise, stable running, with power off memory function. Conformal coating is used on the circuit board, anti interference characteristics and wide voltage design, suitable for complex environment.
9. This product has handles, easy to carry, and can be installed with a variety of pump heads.
Model: Â FL02Â
Rpm: 0.1-400rpmÂ
Flow range: 0.008-2000ml/minÂ
Speed resolution: 0.1rpm（≤100rpm）； 1rpm（≥100rpm）Â
Fine adjustment of filling volume: With the F series pump head of our company, it can realize the arbitrary adjustment of the filling amount, reduce the error between channels, flow compensation etc.
Filling volume resolution: 0.001-0.01mL(different tubing, different adjustment resolution)
Filling quantity repeat error: ±0.3%Â
Filling volume keeps error: 1% in 68 hours under continuous operation conditions of 100 rpm (filling special tube, the speed is inversely proportional to time)
Allocation time: 0.1-999.9SÂ
Distribution volume: 3μL-9999LÂ
of allocations: 1-9999 times（0 times for an infinite loop）Â
Interval time: 0.1-999.9s Â
Display: LCD screen (3.5 inch)Â
Operation: Membrane keypad + Digital control knobÂ
External control speed regulation: 0-5V (standard)ã€0-10V (optional)ã€4-20mA (standard), 0-10K (standard)Â
External control type: Start /stop, Direction changeã€TTL 5V (standard), TTL 12V (optional), TTL 24V (optional)Â
Port output: DC12V Power Output; DC5V TTL Output (optional)Â
Communication Interface: RS232, RS485 (Start/stop, Direction change, speed control)Â
using electric: AC220V±10%, 50Hz/60Hz(standard); AC110V±10%, 50Hz/60Hz; AC380V±10%, 50Hz/60Hz(optional)Â
Power: ≤45WÂ
working environment: Temperature, 0℃ to 40℃; Relative humidity < 80%
Protection level: IP31Â
Weight: 6.1kg
Drive model | Pump head | Tubing（内径*å£åŽšmm） | Flow range (mL/min) |
FL02 | F15 | 13# 14# 19# 16# 25# 17# 18# | 0.008-32 0.028-114 0.053-214 0.088-354 0.188-754 0.31-1240 0.4-1600 |
F25 | 15# 24# 35# 36# | 0.175-700 0.27-1080 0.385-1540 0.5-2000 | |
MC8X | 0.19*0.9 0.25*0.9 0.5*0.8 1*1 2*1 2.4*0.85 2.79*0.85 | (≤100rpm) 0.0002-0.2 (≤100rpm) 0.00035-0.35 (≤100rpm) 0.0013-1.3 (≤100rpm)0.0053-5.3 (≤100rpm)0.015-15 (≤100rpm)0.0185-18.5 (≤100rpm)0.025-25 | |
MC4X | 0.19*0.9 0.25*0.9 0.5*0.8 1*1 2*1 2.4*0.85 2.79*0.85 | (≤100rpm)0.00024-0.24 (≤100rpm)0.00042-0.42 (≤100rpm)0.00166-1.66 (≤100rpm)0.00556-5.56 (≤100rpm)0.0206-20.6 (≤100rpm)0.024-24 (≤100rpm)0.0324-32.4 | |
BZ15-16 | 16# | 0.082-328 |
Signup today to claim your Discount. Get Started before it's too late!
