| Product Name: T-MAT Product Introduction: T-mat is designed for installation into thin adhesives, levelling compounds or thin screed beds beneath tiled and wooden floor finish. Introduction T-mat uses a twin conductor heating cable for easy of installation and very low EMF. The mat thickness of only 4.0mm enables underfloor heating installations into most quality two-part adhesive with a minimum increase in floor height. Technical data Cable construction: Twin conductor Conductor: Solid Heating core Insulation: Fluoropolymer Shield: Cu il Protective jacket: PVC Connector: Out splice Outside diameter: 3.6mm Rated voltage: 230VAC Power output: 150W/m2 200W/m2 Resistance tolerance: +10/-5% Features 150W/m2 200W/m2 Twin conductor heating cable Very low EMF Only one cold tail for ease of Installation,2.5meters Thin, only 4.0mm Self adhesive Flexible 100% screened Application ♦ T-mat is designed for installation into thin adhesives, levelling compounds or thin screed beds beneath tiled and wooden floor finish. ♦ 150w/m2 heating mats are suitable as a primary heating source providing you have adequate insulation. These are our most commonly used mats for kitchens, dining rooms, large bathrooms and most other areas with tiled floors. ♦ 200w/m2 underfloor heating mats are generally used in areas where high heat loss is a problem, such as conservatories. These mats are only suitable under tiled floors,giving a 25% faster warm up time. ♦ Renovated and thin floors ♦ Under tile ♦ Under timber |
