1 power module is required. Used to install q series modules. The application range is wider and more advanced. Q Series CPU products of Yudai.
Q Series CPU products are widely used,
Provide various CPUs of programmable controller, process, redundancy, C language, motion, manipulator and CNC to meet various control requirements.
Through multi CPU configuration, a good system meeting various control requirements can be built according to the use scale and purpose.
In addition, through the redundant system, a high reliability system can be built, and the system can continue to operate even in case of failure. A good network that matches the application purpose and purpose to realize seamless communication between layered systems. Strengthen information communication capacity through networking.
This is also the network environment provided by Q series, a big topic in the automation field
It is truly open & seamless. Including universal Ethernet Based
"CC linkle control" controller network for easy management environment,
And the "CC link Le field" field network that realizes high-speed and large capacity transmission under its management. It also includes Japan's initiative to meet the standards
And has obtained semi certified field network "CC link",
And the provincial distribution network "CC link/lt", which inherits its design concept, and supports the sensor network "anyr>
Flexibly integrate all layers of the automation network with a full nput points: 32 points
Input voltage and current: dc24v4ma. Response time: 1/5/10/20/70ms32 point 1 public terminal. Common anode.
Output points: 32 points
Output voltage and current: dc12-24v; 0.1a/ point; 2a/ public end Mitsubishi q65b. Response time: 1ms
32 points, 1 common end, leakage type; 40 pin connector. With thermal protection.
Q65b with short-circuit protection and surge absorber
Reduce startup time with sample tracking
With the sampling and tracking function, it is convenient to analyze the data in case of failure,
Test program debugging time, etc., can shorten the equipment fault analysis time and start-up time.
In addition, it is also helpful to determine the data transmission and receiving time between CPU modules in a multi CPU system Mitsubishi q65b The collected data can be analyzed with programming tools
The data changes of bit soft components and word soft components can be easily displayed in the form of charts and trend charts. In parallel, the sampling tracking results can be saved in CSV in the form of gxlogviewer and displayed through the recording data display and analysis tool gxlogviewer. High speed processing, shorter production time, better performance,
As the application becomes larger and more complex, it is very necessary to shorten the system operation cycle time of Mitsubishi q65b. Through high basic operation processing speed of 1.9ns, the operation cycle can be shortened.
In addition to realizing the high-speed control associated with single-chip microcomputer control in the past, it can also improve the system performance by reducing the total scanning time,
Prevent any possible performance deviation. Easy to handle large volumes of data,
In the past, it was impossible to realize the continuous access of file register areas of standard ram and SRAM card. When compiling, it is necessary to consider the boundary of each area and install an expansion board. 8MB SRAM expansion card is installed in the high-speed general-purpose qcpu. The standard RAM can be used as a continuous file register with a capacity of up to 4736k words, thus simplifying the programming. Therefore, even if the soft ace is insufficient,
You can also easily expand the file storage area by installing an extended SRAM card.
The index register is extended to 32 bits, so that the programming can go beyond the traditional 32K words, and the smaller modification can be extended to all areas of the file memory.
In addition, the processing speed of indexing modification plays an important role in the operation of structured data (array), which has been improved.
The scanning time can be shortened when the index modification is carried out in a thousand repeated processing programs (such as instructions from for to next, etc.). Input points: 16 points.
Input voltage and current: dc24v6ma response time: 0/0.1/0.2/0.4/0.6/1ms. 16 points /1 common end. Common anode.
18 point terminal block.
Easily connect programming tools through Ethernet,
When the programming tool (GX developer) is directly connected with the CPU (1 to 1), there is no need to set the p address, and there is no need to select the cable. Both the straight the cross be used. Therefore, this connection method is the same as using USB, which can easily communicate with the CPU. Even operators who are not familiar with network settings can easily establish connections. Modules with exnt performance
Meet various control requirements from analog quantity to positioning.
Q series module products include a variety of i/o, analog and positioning function modules.
It can meet the control requirements of various industries and fields, such as input and output of switches, sensors, temperature, weight, flow, control of motors and drivers, and positioning of required control.
It can also be used in combination with the CPU module to achieve appropriate control of q65b, constantly surpass and bravely climb the Q series. Strengthen the safety function.
The file password of Mitsubishi q65b with a length of 32 characters can be set,
In addition to English letters and , special characters can also be used to further enhance the security of the password.
In addition, only pre registered devices are allowed to access the CPU, thus blocking the access of unauthorized users,
Therefore, it can prevent the outflow of important process assets and protect intellectual property rights
Signup today to claim your Discount. Get Started before it's too late!
