Nail Cutter tools for Z94 series Nail Making Machine
Product introduction:
Nail cutter as one part of Nail Making Tools, there are different Model with different nail making machine brand. These are for Z94 Series Nail making machine accessories. They have different angle and different dimension . Of course, we can supply special nail making machine wear and spare parts, just as customer’s drawings and requirements.
Z94 series automatic nail making machine, its characteristic is, with high speed, low noise. This machine adopts the plunger type structure, to ensure its high speed, low noise, less impact characteristics, especially can produce good quality, used for high speed nail welding machine and nail machine gun used in the linoleum nails and other abnormal shape nails. Is now the most advanced nail machine.
OVERVIEW:
Products: nail cutter /nail knife Products NO.: NM 03
Place of Origin: Hebei China Productmaterial:Tungsten Carbide
Shaping Mode: Forging mould Sample: Provided
Trial order: Acceptable Size: Customized
Service: OEM
Product Parameter:
| Grade | Equal to ISO | Density (g/cm3) | TRS (N/mm2) | Harness (HRA) | USE |
| YG15 | K40 | 14.0 | 2300 | 86.5 | For fabricating drawing dies of steel tubes and rods under high compressibility ratio; punching stamping forging tools under large stress. |
| YG20 | K40 | 13.5 | 2400 | 84 | For various dies made by cold forging, cold stamping and hot forging. |
| YG20C | K40 | 13.4 | 2600 | 81-82 | Dies for wear resistant or impact resistant application |
Product Details:
Drawing:
Product Qualification:
Customized tungsten carbide nail Making knife:
1.Doubled tool life 2.Exnt process security 3.Automatic force compensation 4.The two-piece design provides unique breakage protection for clamping inserts, thus helping nail producers to double tool life! Renowned machine producers such as Wafios appreciate this. In this Way it is possible to minimise machine downtime. And at the same time to optimise machine utilisation.
5.Product quality assurance.
6.Provide technical support to customers
Wear and tear:
The adjustment of the nail knife also has acertain technical content, which requires that the two nail knives can not bematched too closely, nor can they be too wide.Too wide will lead to chopping steel t of the nail tip is not qualified, too close will increasethe loss of the nail knife.The best effect can be achieved by combining the working characteristics of the whole nail making machine with the action of thenail gripper and puncher.The proper distance between two nail knives is that the cutoff nail tip has a small edge on it, but it can be removed with a touch of the hand. At this time, after polishing, a beautiful nail tip can be thrown out,and the loss of the nail knife will be greatly reduced.
Signup today to claim your Discount. Get Started before it's too late!
