I- Applications 1. PE shopping bags & garbage bags, industrial films, packaging material & containers etc 2. In general for injection, extrusion, film blown molding technology II- Features 1. VCE80 is a polyethylene based master batch containing 80% calcium carbonate. It is grayish white with exnt dispensability. 2. It helps improve for machineâs extrusion efficiency and increase film & moldâs sical properties. 3. It can be mixed with polyethylene resin for film blowing, casting, extrusion etc. and is easy to disperse with good compatibility. It functions as a modifier to improve the heat resistance, slip resistance, size stability and printability. It also reduces heat release from burning and therefore it prevents further environmental pollution Item code: VCE80 Carrier resin: PE CaCO3 Content: 80% Density: 1.2 g/cm3 Moisture content: â¤0.15 % max Melting flow index (230°C/ 2.16 kg): 1.5 g/10mins Particle size: 2 ± 0.5 micron Whiteness: >98% III. Processing suggestions 1. In general, the recommended loading ratio is from 5~60% depending on technology, products or machines⦠etc 2. The processing temperature is set from 120 oC - 230oC according to resinâs processing temperature IV- Package, Transportation and Storage suggestions: 1. Please kindly note to avoid moisture, isolation and breakage in transportation and storage. 2. The product is sensitive to moisture. Make sure to use product immediately after opening bags. Please dry materials by hot air recycle machine under 90oC for at least 30 minutes in case of or to remove moisture. 3. Packing : 25 kgs/bag printed or non-printed (or Jumbo bag)
Signup today to claim your Discount. Get Started
before it's too late!
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.
Ok