Punches

Specialises in all types of punches including centre punch, pin punch, taper punch, nail punch, roll pin punch, transfer and aligner punch.

C.no Oal of the Centre punch Diameter of Taper inch mm inch mm

CPR0160	3	75	1/16	1.6
CPR0200	4	100	5/64	2.0
CPR0240	4	100	3/32	2.4
CPR0360	4	100	9/64	3.6
CPR0400	4	100	5/32	4.0
CPR0800	4	100	5/16	8.0
CPR0320	4	100	1/8	3.2
CPR0440	4	100	11/64	4.4
CPR0480	4-1/2	115	3/16	4.8
CPR0630	5	125	1/4	6.3
CPR0950	6	150	3/8	9.5
CPR0000	5pc Set including sizes from 1/16 to 5/32 inches of diameter of taper

C.no Oal of the Drive pin punch Diameter inch mm inch mm

DPS0160	4	100	1/16	1.6
DPS0240	4	100	3/32	2.4
DPS0320	4	100	1/8	3.2
DPS0400	4	100	5/32	4.0
DPS0480	4	100	3/16	4.8
DPS0550	4	100	7/32	5.5
DPS0640	4	100	1/4	6.4
DPS0800	4	100	5/16	8.0
DPS0000	8pc Set

C.No Tip Size Length of Nail punch Body Diameter inch mm inch mm inch mm

NPR0160	1/16	1.6	4	100	3/8	9/5
NPR0240	3/32	2.4	4	100	3/8	9/5
NPR0320	1/8	3.2	4	100	3/8	9/5
NPR0400	5/32	4.0	4	100	3/8	9/5
NPR0480	3/16	4.8	4	100	3/8	9/5
NPR0080	1/32	0.8	4	100	3/8	9/5
NPR0480A	3/16	4.8	4-1/2	115	3/8	9/5
NPR0630	1/4	6.3	5	125	7/16	11.0
NPR0000	5pc set including tip sizes from 1/16 to 3/16 (4")

C.no Transfer Punch set

TP0000	Set of 28 punches in metal stand(3/32" to 1/2" by 64")plus 17/32"

C.no Range of Aligner punch inch mm

UTP0316	3/16 to 5/8	5 to 15
UTP0316A	3/16 to 1-3/16	5 to 30