Polycrystalond (PCD) Sintered
The Polycrystalond of Accurate Tooling (AT) is the high quality diamond micron powder sintered with appropriate bonding under conditions of high temperature and high pressure (HTHP).
Polycrystalond Tools VS Carbide Tools
* 50-300% life time increased* high removal rate* high machining accuracy* reduced machine downtime* cost effectiveMachining Application* non-ferrous metals and alloys * composites* wear partsDiamond Grain Particle* 5μm fine diamond* 10μm medium diamond* 25μm coarse diamondCoarse diamond particles have better abrasion resistance, but the larger particle resulted in the rougher surface finishing.On the contrary, fine diamond particles have better performace on the cutting edges, however, the life time would be shorter than larger ones. Available Specifictions Angle | | Size L | Thickness |
T35° | 3.8/4.5/5.0 | 1.6/2.0/3.2 |
T45° | 4.0/5.0/6.2 | 1.6/2.0/3.2 |
T55° | 4.0/5.0/7.0 | 1.6/2.0/3.2 |
T60° | 4.0/5.0/7.0 | 1.6/2.0/3.2 |
T90° | 3.0/5.0/6.5 | 1.6/2.0/3.2 |
360° | | 8.0 | 1.6/2.0/3.2 |
360° | | 13.2 | 1.6/2.0/3.2 |
360° | | 25.4 | 1.6/2.0/3.2 |
360° | | 48.0 | 1.6/2.0/3.2 |
360° | | 51.0 | 1.6/2.0/3.2 |
360° | | 60.0 | 1.6/2.0/3.2 |
Length | | Width | Thickness |
3.5 | | 3.0 | 1.6/2.0/3.2 |
5.0 | | 2.0 | 1.6/2.0/3.2 |
5.0 | | 3.5 | 1.6/2.0/3.2 |
6.0 | | 4.0 | 1.6/2.0/3.2 |
7.0 | | 3.0 | 1.6/2.0/3.2 |
10.0 | | 3.0 | 1.6/2.0/3.2 |
13.0 | | 3.0 | 1.6/2.0/3.2 |
25.0 | | 3.0 | 1.6/2.0/3.2 |
ACCURATE Tooling Co.,Ltd.