Royal Glass Zitto Folding Technical Glazing System
1. Loadbearing lower case profile within the base surface of width is; 54,5 mm, aforesaid other loadbearing profile; within the upper case is 46,4 mm. Existence of these profiles inside; there are two channels operating separately from each other performing the duty of carrier.
2. Through the vertical height of the lower carrier; a cubicle waterspout is implemented. The height of the initial cubicle is 11 mm and is inc>
3. By courtesy of trio cubicle profiles; the exterior is out of sight and air ingression is prevented directly.
4. Under favor of lengthwise hair cord channel at case profile, hair cord might be implemented continuously.
5. Within moving wing profile; thanks to the centering channel; axial run-outs are prevented. Additionally; carrier profile; preserving any excess sealant within the joint of glass and aluminum.
6. Aluminium caps shutting down the wing profile outrightly moreover plastic cap is not used within wings.
7. Ali pitch joint details (sections of; sub strut and pitch joints ) possessing the same design.
8. Being optional; aforesaid the first wing to be opened might be implemented as a lever and Along the height of wing espagnolette sheet that is providing locking can be implemented.
9. Within the Zitto series; the first quality heat-treated aluminum profiles, produced 6060, 6063 alloys are used.
1 O. Hair cord, magnet gasket, or PVC gasket might be enforced to the aluminum.