Copper Cable, category 6A, 4 pair, U/UTP, CM, 23 AWG, 1000 ft Product Specifications
Product Classification | |
Portfolio | Blrand® |
Brand | Giga 10G |
Product Type | Twisted pair cable |
Regional Availability | Asia | Australia/New Zealand | EMEA | Latin America | North America |
Cross Section Drawing | |
Click on image below to enlarge. | |
Construction Materials | |
Jacket Material | PVC |
Conductor Material | Bare copper |
Insulation Material | FEP |
Separator Material | FEP |
Separator 2 Material | Polyolefin |
Dimensions | |
Cable Length | 305 m | 1000 ft |
Cable Weight | 40.70 lb/kft |
Diameter Over Jacket, nominal | 7.239 mm | 0.285 in |
Jacket Thickness | 1.295 mm | 0.051 in |
Electrical Specifications | |
ANSI/TIA Category | 6A |
dc Resistance Unbalance, maximum | 4 % |
dc Resistance, maximum | 7.61 ohms/100 m |
Dielectric Strength, minimum | 1500 Vac | 2500 Vdc |
LP (Limited Power) Rating | 0.6 A |
Mutual Capacitance at Frequency | 6.0 nF/100 m @ 1 kHz |
Nominal Velocity of Propagation (NVP) | 66 % |
Operating Frequency, maximum | 550 MHz |
Operating Voltage, maximum | 80 V |
Remote Powering | Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A |
Transmission Standards | ANSI/TIA-568-C.2 | ISO/IEC 11801 Class EA |
Note | Consult ANSI/TIA-568-C.2 Annex G for length de-rating guidance for cable installation in higher temperature environments |
Environmental Specifications | |
Environmental Space | Plenum |
Smoke Test Method | CMP |
Flame Test Method | CMP |
Installation Temperature | 0 °C to +60 °C (+32 °F to +140 °F) |
Operating Temperature | -20 °C to +75 °C (-4 °F to +167 °F) |
Temperature Rating, ETL | 105 °C | 221 °F |
Temperature Rating, UL | 105 °C | 221 °F |
General Specifications | |
Cable Type | U/UTP (unshielded) |
Packaging Type | Reel |
Pairs, quantity | 4 |
Cable Component Type | Horizontal |
Jacket Color | Blue |
Product | 2091B |
Conductor Gauge, singles | 23 AWG |
Conductor Type, singles | Solid |
Conductors, quantity | 8 |
Separator Type | Isolator |
Mechanical Specifications | |
Pulling Tension, maximum | 11 kg | 25 lb |
Regulatory Compliance/Certifications
Agency | Classification |
RoHS 2011/65/EU | Compliant |
ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |