How To Maintain The Small Lab Two Roll Mill Machine?

Lab two roll mill machine is a rubber mix mill, Mainly used in rubber factory. it is also used in plastic products factory and is called a two roll mill.This is the earliest mixed plastic equipment, and The maintenance of lab two roll mill machine is essential. 1.The main rotating motor of Lab two roll mill machine adopts Y series motor. which has high efficiency and good energy saving effect. In order to limit the stating current of the motor, The control circuit adopts Y-step-down starting mode, which makes operation and maintennance simple and reliable. 2.The working principle of the control circuit. when the motor is started, the stator winding of the motor is Y-shaped. When the speed increases to a certain level, the motor will aotomatically become a triangle through the time -continuous electrical control actor, So that the electromechanical works normally. 3.Operation of the Lab two roll mill machine:The operation uses the button on the control panel to control the start and stop of the host. There is a lever on the body to control the emergency brake of the host. 4.two roll mill electrical equipment maintennance 1)The rotation of the electrical control box must be stable. This position should not interfere with the opening of the door of the control box. and there should be room for maintenance personnel to work. 2)A considerable insulation distance should be maintained between live and non-electric objects.3) Appropriate grounding protection devices should be installed where appropriate or designated for the electrical equipment of the machine.The maintenance of the lab two roll mill machine is effective for the rolling mill to ensure safety during use. Maintenance of the two roll mill can extend the service life .