Looking for 40W UL wall mount power adapter with multiple plugs (Four). Detailed Description Need UL Class 2 (Category EPBU and EPBU7) and CE certificated for home appliance usage. 110V to 230VAC to 12VDC 3.5A output Rated Input Voltage 100Vac to 240Vac input AC voltage The charger shall operate from 90Vac Show More...
Looking for 40W UL wall mount power adapter with multiple plugs (Four). Detailed Description Need UL Class 2 (Category EPBU and EPBU7) and CE certificated for home appliance usage. 110V to 230VAC to 12VDC 3.5A output Rated Input Voltage 100Vac to 240Vac input AC voltage The charger shall operate from 90Vac to 264Vac and the range switching is unnecessary Rated Frequency 50Hz or 60Hz and single se Peak Inrush Current --With cold starting, the peak inrush current should less than 30A The rated output voltage is specified at 12V The output current will be performed from 3.5Aat CC mode capable to support 42Watts max continuously at all specified conditions Over Current Protection --- Output current will be limited and less than 7A max Output cable and DC Plug ---Output Voltage No load voltage: 11.40V ~ 12.60V ---Full load voltage: 11.40V ~ 12.60V ---Rated Output Current The output current will be performed from 3.5Aat CC mode. ---Rated Power This switching adapter is capable to support 42Watts max continuously at all specified conditions. 80℃ 300V Length 1.8M . Plug: 5.5*2.5*10mm Drop the charger from a height of 76cm onto a hardwood floor, hitting the charger for 6 times, no mechanical damages or other failures, no electrical deterioration and other failures comparing to before test condition. Operating Temperature 0u00b0C TO 40u00b0C Storage Temperature -20u00b0C TO +70u00b0C Case Resin materials Flame resistance applies to UL94V-0 or more EAU is 50K. You can send quote to joe.lin at itt.com