We are looking for the following:- That the machine can cut balsa wood blocks. - That the machine has clamps (or vacuum table) to secure the blocks during cutting. So the cutting thickness tolerance is + - 0.25mm- The thickness is set electronically. - The length of the table should be a minimum of 5000mm long. - The width of the table (cutting width) sho Show More...
We are looking for the following:- That the machine can cut balsa wood blocks. - That the machine has clamps (or vacuum table) to secure the blocks during cutting. So the cutting thickness tolerance is + - 0.25mm- The thickness is set electronically. - The length of the table should be a minimum of 5000mm long. - The width of the table (cutting width) should be a minimum of 1250mm- The bridge should be able to go up to 1250mm high. We can potentially buy 4-5 machines if you can meet our requirements.