Post must be white (color should remain broadly unchanged during the entire warranty period) with a diagonal black band (inset molded black) with orange and white diamond reflective film or similar (reflector length - 18.0 cm, width - 4.0 cm). Post width from 80 to 100 mm and length 120 mm, height should be 1.6 m. Instal Show More...
Post must be white (color should remain broadly unchanged during the entire warranty period) with a diagonal black band (inset molded black) with orange and white diamond reflective film or similar (reflector length - 18.0 cm, width - 4.0 cm). Post width from 80 to 100 mm and length 120 mm, height should be 1.6 m. Installed 1 m above the ground, and is embedded in the ground of 0.6 m. The outer surface must be smooth and without irregularities (cracks, fissures, cracks, blow stratification, junctions, etc. ). A diagonal bar (molded black inset) should be smooth, without damage (cracks, wrinkles, puffs, swell, etc. ). Film light reflection coefficient (CD lx m2) at an illumination angle Beta = + 5 degr. And an observation angle of Alfa = 0, 33 degr. Shall be not less than: 300 for white film and 150 for orange film. The product must be resistant positive and freezing temperatures, sunlight, salt, oil, cold long-term exposure is easy to clean. High-intensity reflective film is attached so that it can not be manually peel off, tear off without tools or effort. The product (column) must comply with BS EN 12899-3 or equivalent standard. Post and reflectors service life warranty 3 years.