We are looking for a supplier of tube plugs or can tops manufactured from steel or aluminum. Domed top, or flat top is OK. Attached is a picture of a sample. Material: steel, tinned steel, lacquered steel, aluminum are all OK. Thickness:If steel, probably 0.25 mm to 0.5 mm is OK. If aluminum, 0.5 to 0.8 mm is OK. Radius:With, or without Show More...
We are looking for a supplier of tube plugs or can tops manufactured from steel or aluminum. Domed top, or flat top is OK. Attached is a picture of a sample. Material: steel, tinned steel, lacquered steel, aluminum are all OK. Thickness:If steel, probably 0.25 mm to 0.5 mm is OK. If aluminum, 0.5 to 0.8 mm is OK. Radius:With, or without a radius is OK. Height- Minimum 3 8 tall (~ 10 mm). We prefer about 1 2-inch to -inch high (12 mm to 20 mm). For quoting you can use these outsters.Prior to manufacturing, we will give you final diameters for production. 1.610 inches (~ 40.5 mm) 1.875 inches (~ 47.5 mm) 2.108 inches (~ 53.5 mm) 2.350 inches (~ 59.5 mm) The plug goes a few inches into the end of a tube, so it does not need a curled or rolled over edge. Please quote in quantities of 1,000 2,000 and 3,000 per size. Leigh Howard Stevens, CEO Malletech Inc. Neptune New Jersey USA