Website: http://www.grandstarwax.com/
Zhejiang Grand Star Chemistry Co., Ltd. is located in China Chemical Material (Jiaxing) Park. The company focuses on product R & D, process design, industrial production and customer service. The company has built industrial devices such as 1000 tons of medium-high phase change temperature waxes, 10000 tons of oxidized waxes, 30000 tons of refined Fischer Tropsch waxes and 20000 tons of synthetic microcrystalline waxes, equipped with small & medium scale R & D devices for special wax and perfect analysis and detection instruments. Product Series - Phase Change Wax 46 ℃ ~ 125 ℃ medium-high phase change temperature waxes are produced by the technology combination of subcritical extraction, regional melting crystallization and high vacuum molecular distillation,etc. Typical grades are FPC46, FPC50, FPC56, FPC62, FPC66, FPC70, FPC76, FPC80, FPC84, FPC88, FPC92, FPC96, FPC98, FPC104 , FPC110 and FPC125 , and products with any phase change temperature within the above temperature range can be available for custom production. - Oxidized wax Using pure oxygen instead of air as molecular oxidant. The process has the advantages of fast reaction rate, less side reactions, good product quality, continuous production and environment-friendly. Product series:oxidized Fischer Tropsch wax (OFT), oxidized microcrystalline wax (OFM), oxidized polyethylene wax (OPE), oxidized polypropylene wax (OPP) - Refined Fischer Tropsch wax Using self-developed proprietary molecular distillation equipment and hydrofining patented technology, we produce 45 ℃ ~ 115 ℃ series refined Fischer Tropsch wax. Typical grades: FR60, FR70, FR80, FR90, FR95L,FR100L, FR100,FR105, FR115 - GSCbit series Warm Mix Bitumen Modifier Using independent proprietary technology and a series of optimized combination processes, a series of warm mix asphalt modifier have been developed , which can be applied to the viscosity reduction requirements of different base asphalt and various modified asphalt. Typical grades: GSCbit L，GSCbit M ，GSCbit H - Synthetic microcrystalline wax The synthetic microcrystalline wax with different isomerization degree was produced by using the independently developed catalyst and production process. Typical brand: FM70, FM80, FM90, FM100 R & D Equipment - Pilot plant of molecular distillation The three-stage molecular distillation pilot plant has a treatment capacity of 100kg/h and the absolute pressure of the system can be as low as 0.1pA.It can meet most of process conditions optimization of high boiling point and heat sensitive materials and the mass production of high value-added products. - Pilot Plant of Pure Oxygen Oxidation Pure oxygen and nitrogen are used to simulate air for oxidation, with high oxidation efficiency, continuous production and no waste gas emission. It can provide personalized oxidized wax technology development and processing services for customers at home and abroad. Testing Equipment - Agilent (8890gc) Gas Chromatograph The FID, which can automatically adjust the detection range, can achieve ppb-level detection and quantitative analysis in a single injection.It can effectively analyze high-melting Fischer-Tropsch waxes with a carbon number of less than 130. - Mettler Toledo (DSC3) Differential Scanning Calorimeter The measurement temperature can range from - 150 ℃ to 700 ℃, accurate to +/- 0.1℃ - Ultraviolet Visible Spectrophotometer It can directly test raw wax samples with a melting point not higher than 150°C, and perform qualitative and quantitative analysis of aromatic hydrocarbons and fused-ring aromatic hydrocarbons in order to meet the requirements of high-quality waxes in the fields of medicine, food, and cosmetics.
Zhejiang Grand Star Chemistry Co., Ltd. is located in China Chemical Material (Jiaxing) Park. The company focuses on product R & D, process design, industrial production and customer service. The company has built industrial devices such as 1000 tons of medium-high phase change temperature waxes, 10000 tons of oxidized waxes, 30000 tons of refined Fischer Tropsch waxes and 20000 tons of synthetic microcrystalline waxes, equipped with small & medium scale R & D devices for special wax and perfect analysis and detection instruments. Product Series - Phase Change Wax 46 ℃ ~ 125 ℃ medium-high phase change temperature waxes are produced by the technology combination of subcritical extraction, regional melting crystallization and high vacuum molecular distillation,etc. Typical grades are FPC46, FPC50, FPC56, FPC62, FPC66, FPC70, FPC76, FPC80, FPC84, FPC88, FPC92, FPC96, FPC98, FPC104 , FPC110 and FPC125 , and products with any phase change temperature within the above temperature range can be available for custom production. - Oxidized wax Using pure oxygen instead of air as molecular oxidant. The process has the advantages of fast reaction rate, less side reactions, good product quality, continuous production and environment-friendly. Product series:oxidized Fischer Tropsch wax (OFT), oxidized microcrystalline wax (OFM), oxidized polyethylene wax (OPE), oxidized polypropylene wax (OPP) - Refined Fischer Tropsch wax Using self-developed proprietary molecular distillation equipment and hydrofining patented technology, we produce 45 ℃ ~ 115 ℃ series refined Fischer Tropsch wax. Typical grades: FR60, FR70, FR80, FR90, FR95L,FR100L, FR100,FR105, FR115 - GSCbit series Warm Mix Bitumen Modifier Using independent proprietary technology and a series of optimized combination processes, a series of warm mix asphalt modifier have been developed , which can be applied to the viscosity reduction requirements of different base asphalt and various modified asphalt. Typical grades: GSCbit L，GSCbit M ，GSCbit H - Synthetic microcrystalline wax The synthetic microcrystalline wax with different isomerization degree was produced by using the independently developed catalyst and production process. Typical brand: FM70, FM80, FM90, FM100 R & D Equipment - Pilot plant of molecular distillation The three-stage molecular distillation pilot plant has a treatment capacity of 100kg/h and the absolute pressure of the system can be as low as 0.1pA.It can meet most of process conditions optimization of high boiling point and heat sensitive materials and the mass production of high value-added products. - Pilot Plant of Pure Oxygen Oxidation Pure oxygen and nitrogen are used to simulate air for oxidation, with high oxidation efficiency, continuous production and no waste gas emission. It can provide personalized oxidized wax technology development and processing services for customers at home and abroad. Testing Equipment - Agilent (8890gc) Gas Chromatograph The FID, which can automatically adjust the detection range, can achieve ppb-level detection and quantitative analysis in a single injection.It can effectively analyze high-melting Fischer-Tropsch waxes with a carbon number of less than 130. - Mettler Toledo (DSC3) Differential Scanning Calorimeter The measurement temperature can range from - 150 ℃ to 700 ℃, accurate to +/- 0.1℃ - Ultraviolet Visible Spectrophotometer It can directly test raw wax samples with a melting point not higher than 150°C, and perform qualitative and quantitative analysis of aromatic hydrocarbons and fused-ring aromatic hydrocarbons in order to meet the requirements of high-quality waxes in the fields of medicine, food, and cosmetics.
Signup today to claim your Discount. Get Started before it's too late!
