FPD Series Power Transducer

Input & Output parameters An:电流输入范围 Input Ranges Current    Vn：电压输入范围 Input Ranges Voltage    Pn：电源                rating Aux. Power Standard     range A1 0-1mA    A2 0-2mA    V1 0-50mV    V2 0-100mV    V3 0-200mV    P1 AC110 V 120 V ± 15%    PD1 DC110V 120 V ± 15% A3 0-5mA    A4 0-10mA    V4 0-500mV    V5 0-1V    V6 0-2V    P2 AC220 V 240 V ± 15%    PD2 DC220V 240V± 15% A5 0-20mA    A6 4-20mA    V7 0-5V    V8 1-5V    V9 0-10V    Ps Internal Power    PD3 DC24 V 24 V ± 20% A7 0-50mA    A8 10-50mA    V10 2-10V    V11 0-120V    V12 0-200V    Py Specified    PDy Specified A9 0-75mV        V13 0-350V    V14 0-600V             On:输出 Output Range    O1 0-1mA    O2 0-20mA    O3 4-20mA    O4 0-5mA    O5 0-10mA         O7 0-1V    O8 0-5V    O9 0-10V    O10 2-10V    O11 1-5V    O13 用户指定   Specification Accuracy ( 23±3°C )    0.2% of effecive range Linearty & repeatability    0.05% typical Dielectric strength    2000Vac ... power / input & output terminals    FPD 2000Vac ... input / output / case    FPD 4000Vac ... power / input & output terminals    FPDH 4000Vac ... input / output / case    FPDH Output drive capability    ≤10mA for voltage mode, ≤10V for current mode Maximum input over    ≤300Vrms continuous    > 2V ranges ≤150Vrms continuous    ≤2V ranges ≤150mA continuous for current input Input resistance-ohm    ≤100M ... ≤2V ranges,≤500K    >2V ranges ≤20    for all current input range Power effect    < 0.003% for per volt chang Response time & ripple    250 ms typically, ripple < 0.1% rms ro Common mode rejection    120dB, DC to 60Hz Temperatured stability    ≤0.007% ro per degree C Storage condition    Temperature range -10 to 70°C, RH 20 to 95% non condensed Operating condition    Temperature range -5 to 55°C, RH 20 to 95% non condensed Power supply    ±10% of rated, less 3.5 VA for AC input ±10% of rated, less 3.5 Watt for DC input Construction    Socket plug-in type with barrier terminals