GPF Series Power Transducer

Input & Output parameters Fn : Frequency input    Fn range    F1 50 Hz    F2 60 Hz    F3 400 Hz    Fy Specified    On : Output Pn : Auxiliary power    Pn rating range    P1 AC110 V 120 V ± 15%    P2 AC220 V 240 V ± 15%    Ps Internal Power    Py Specified    O1 0-1mA    O2 0-20mA    O3 4-20mA     PDn rating range    PD1 DC110 V 120 V ± 15%    PD2 DC220 V 240V ± 15%    PD3 DC24 V 24 V ± 20%    PDy Specified    O4 0-5mA    O5 0-10mA     Bn : Band Bn range    B1 ±0.5 Hz    B2 ±1 Hz    B3 ±2 Hz    B4 ±5 Hz    O7 0-1V    O8 0-5V    O9 0-10V         B5 ±10 Hz                O10 2-10V    O11 1-5V    Oy Specified Py : DC24 / 48 / 125 V ±15% or other range under specified Voltage input range : 30 - 600 Vac Note 1. External power mode suitably for all output types Internal power mode, only suitably for 0-1mA / 0-20mA / 0-1V / 0-5V / 0-10V output Specification Reference Standard:     GB/T 13850-1998(IEC688-1992) Accuracy:    0.5%RO according to IEC 688-1,At(23±5℃) Long term stability:        ≤±0.5%/year,No accumulation error Temperature influence:    <100ppm/℃ Response Time:    <400ms Output Ripple:    <1.0% (peak-peak value) Input burden:    Current less 0.2VA;voltage less 0.1VA Frequency:    Nominal  frequency ±10% Maximum output load:    Current output Max10V  pressure drop Voltage output rated 2mA MAX 5mA output Auxiliary power:    < 3VA (for GPA & GPAR);< 8VA (for GPAX); Auxiliary load  effect:    <0. 2 % Allow excessive input:    Current 2 rate continuous  20 rate 1 secs voltage max 2 rate continuous Dielectric strength:    Input/output/power/betwem the crust 2KV,AC 1 min IEC866 Impact test:    ANSI C37.90a/1973,IEC 255-4,(5kV 1.2/50us  Pulsed Voltage) Calibration amplitude:    Full scale least<±3%,zero least<±1% Magnetic field effect:    0.4KA/m magnetic field strength change<0.05% Operating  condition:    Temperature -10～55℃relative  humidity ≤95% RH non condensing Storage condition:    Temperature-40～70℃  relative humidity ≤95% RH non condensing Terminal Connection