Quick Details
- Processing Time:-
- Port:-
- Supply Ability: -
- Brand Name:-
FEATURES
Excellent long term stability (4 ~ 20mA, 500Ω);
Precision measurement even for distorted wave (S3-AD-1T);
High impulse & surge protection (5KV);
The case can be mounted on a 35mm rail which complies with
DIN 46277;
Model:
Accuracy: ± 0.2% RO
S3-AD-1 : 1φinput (AVG.)
S3-AD-3: 3φinput (AVG.)
S3-AD-1T: 1φinput (TRMS)
Accuracy: ± 0.5% RO
N3-AD-1 : 1φinput (AVG.)
N3-AD-3: 3φinput (AVG.)
N3-AD-1T : 1φinput (TRMS)
Sinusoidal Waveforms - AVG.
S3-AD Series Transducer converting a sinusoidal alternating current into a dc output, proportional to the RMS value of input. These units are
average sensing, but RMS calibrated for a sine wave with less than 1% distortion. The input signal is converted to a dc voltage which then feeds to a single stage amplifier and a dc output
produced.
Non-Sinusoidal Waveforms - TRMS
S3-AD-1T ,N3-AD-1T Transducer are designed for use on waveforms with up to 30% of 3rd harmonic content. The input signal is fed to an RMS detection
circuit and the resultant dc volts produced are a linear function of the RMS value of input waveform. This dc voltage is converted to a milliamp output via an output
amlification circuit.
INPUT-OUTPUT CURVE
SPECIFICATION:
INPUT:
Input Range Input Burden Input Frequency Max. Input Over capability
0 ~ 1A
<- 0.1VA 50Hz ± 3Hz
or 60Hz ± 3Hz 3 X rated continuous 10 X rated 10 sec.
50 X rated 1 sec.
0 ~ 5A
OUTPUT:
DC Output Range Load
Resistance Output Resistance Output Ripple Response Time
0 ~ 1V
1K
<-0.05
<- 0.5% RO.
(Peak)
<-400mS. 0 ~ 99%
0 ~ 5V
1 ~ 5V
0 ~ 10V
0 ~ 1mA 0 ~ 10K 20M
0 ~ 10mA 0 ~ 1K
5M
0 ~ 20mA 0 ~ 500
4 ~ 20mA
Aux. power supply AC 110V ± 15%, 50/60HZ
AC 220V ± 15%, 50/60HZ
DC24V, 48V, 110V, ± 15%
Power consumption -2.5VA, ≤DC 3W
Power effect ≤0.1% RO
Waveform effect ≤0.2% RO. at distortion factor 30%( PCIR)
Output load effect ≤0.05% RO.
Magnetic field strength -0.2% RO., 400A/M
Span adjustment range 5%RO
Zero adjustment range 1%RO
Operating temperature range 0 ~ 60℃
Operating temperature range 0 ~ 60℃
Storage temperature range -10 ~ 70℃
Temperature coefficient - 100PPM from 0 to 60℃
≤ 60PPM, 25。C ± 10℃
Max. relative humidity 95%
Isolation Input/output/power/case
Insulation resistance 100M , DC 500V
Dielectric withstand voltage Between input/output/power/case
(IEC 414, 688,ANSI, C37) AC 2.6KV, 60HZ, 1 min.
Impulse withstand test 5KV, 1.2 X 50μS
(IEC 255-4, ANSI C37 90a) Common mode & differential mod
Performance Designed to comply with IEC688
Safety requirements IEC 414, BS5458
CONNECTION DIAGRAM:
●S3-AD-1, S3-AD-1T,N3-AD-1,N3-AD-1T
●S3-AD-3,N3-AD-3
THE OUTSIDE DIMENSION (UNIT: mm)
●S3-AD-1, S3-AD-1T:N3-AD-1,N3-AD-1T:
●S3-AD-3,N3-AD-3: