6m Vehicle Mounted Aluminum Pneumatic Telescopic Mast For CCTV Camera

Product Description What is a Pneumatic Mast?            Pneumatic masts are a type of elevation solution using compressed air to raise the central column to its extended height. The masts can either be locking, which each section locks into place once it reaches its maximum extension - designed for safety and long term use( do not lift down the mast), or non-locking where each section sits on cushion  of air- more appropriate for short time using. Classification of masts Model"AT8"---no cable and no lock, for Short time using and small head load. Model"AT9"---with lock. for long time using and large head load. Model"AT7"---with cable. for mounting camera, lights or antenna. Common application Telecommunications, Surveillance, Broadcasting, Disaster Recovery, Site Surveys, Energy Production,  Site so on. Mast specification Available Extended height:2m to 30m Head load capacity:5kg to 500kg. Lift operation choose If no electricity and head load is not heavy, lift control could be foot pump or hand pump---manual lift. If thers is electricity and head load is heavy, lift control should be air compressor, easily and quickly. Data Sheet Model TAL-P6-1.9-30 extended height 6m retracted height 1.9m max. payload 30kg No. of section 4 outer tube diameter 43-56-70-87mm wind loading capaicty 120km/h  working air pressure 0.25Mpa working temperature -25 deg C to +60 deg C accessories DC12V/24V/AD220V/110V air compressor-------------------------------1pc tripod or car clamp---------------------------------------------------------------------1pc air hose--------------------------------------------------------------------------------------1pc guy wires------------------------------------------------------------------------------------4pcs ground anchors--------------------------------------------------------------------------4pcs control valve-------------------------------------------------------------------------------1pc top plate--------------------------------------------------------------------------------------1pc bottom base---------------------------------------------------------------------------------1pc Detail 4m aluminum locking pneumatische telescopische mast for concret slab Mast material is aluminum alloy 6063-T5  Tube surface treatment is Hard anodizing  Color:Bronze and origin silver color for choose. Acessories Operation steps 1.check the mast in good condition 2.fixed the mast on the ground. tripod fixed diameter is 3.4m,guy wire fixed diameter is 8m. 3.air inlet of control valve connect with air compressor. 4.air outlet of control valve connect wtih the mast. 5. once all mounted, you must keep the lifting control valve handle bar in middle location. (it make the air do not come into mast) 6.open the air compressor switch, at same time adjust the pessure regulating switch to reach 0.2MPa which the pressure gauge shows. 7.then pull up the lifting valve handle bar, mast will rise. 8.if you want to make the mast stop in some height, just make the handle bar in middle. 9. when lift down the mast, please pull down the lifting control valve handle bar.. Packing & Delivery 3.5m CCTV rapid deployable automatic pneumatic mast package carton packed normal package is carton for the extended height less than 9m, weight less than 70kg mast, also can be plywood case at customers request plywood packed normal package is plywood case for extended height more than 10m, weight more than 70kg mast Certifications Catalog Pneumatic telescopic mast MODEL No. Extended  Height (m) Retracted  Height (m) Bottom  OD (mm) TOP OD (mm) Section NO. Head-load (KG) TAL-2.0-1.3-150-AT8 2 1.3 118 98 2 150 TAL-3.0-1.5-50-AT8 3 1.5 98 66 3 50 TAL-4.0-1.3-20-AT8 4 1.3 87 43 4 20 TAL-4.5-1.65-50-AT9 4.5 1.65 118 66 4 50 TAL-5.0-1.7-40-AT8 5 1.7 98 51 4 40 TAL-5.0-1.75-30-AT9 5 1.75 98 51 4 30 TAL-6.0-1.7-30-AT8 6 1.7 118 51 5 30 TAL-6.0-1.75-12-AT8 6 1.75 87 28 5 12 TAL-6.0-2.0-50-AT9 6 2 118 66 4 50 TAL-6.0-1.95-30-AT8 6 1.95 87 43 4 30 TAL-6.0-1.5-25-AT9 6 1.5 118 51 5 25 TAL-7.0-1.95-40-AT8 7 1.95 118 51 5 40 TAL-8.0-1.8-50-AT9 8 1.8 160 51 7 50 TAL-8.0-2.2-60-AT7 8 2.2 140 66 5 60 TAL-8.0-2.0-25-AT8 8 2 118 36 6 25 TAL-9.0-2.15-30-AT8 9 2.15 140 51 6 30 TAL-10.0-2.4-30-AT7 10 2.4 140 51 6 30 TAL-12.0-2.7-250-AT8 12 2.7 279 140 7 250 TAL-15.0-3.5-150-AT9 15 3.5 229 98 6 150 TAL-16.0-3.0-30-AT8 16 3 180 51 8 30 TAL-18.0-3.0-100-AT8 18 3 279 66 10 100 TAL-20.0-3.3-55-AT8 20 3.3 229 66 9 55 TAL-30.0-4.0-30-AT8 30 4 316 51 13 30 NOTE: above specification are standard model, customized size accepted Our Service OEM/ODM service available for the buyers 1 year free after-sale warranty after delivery Professional team for consulation, solution and designing Complete quality control system before delivery Multi-way fast delivery channel at buyer's option Welcome to contact Company profile About"Talents"        Talents is a Chinese company that design, manufacture and supply a range of manual/electric/pneumatic/hydraulic operated telescopic masts and lifting devices that made of aluminum alloy tube, stainless steel tube, fiberglass tube and carbon fiber tube.       Our masts are CE certified, we have been a golden supplier on Alibaba since 2007, we are keeping with our customers an one for one timely information feedback, we have organized an expert team for quality control and inspection system, we have built up Multi-way fast delivery channels and we are supplying one year free after-sale warranty to the buyer.       We think outside the box and are continually developing new products to meet customer requirements, what you are asking for is our motive power of task, we wish one of our products will well-meet what you demand. Any questions or inquiry, welcome to contact us at any time Reply the inquiry by email within 24 hours                                     by Skype/Whatsapp/Wechat immidately