220V 2.2KW Single Phase Input And 220V 3 Phase Output Frequency Converter

500Hz交流变频器 产品描述 1.POWTRAN AC Drives power range: 0.75~630KW. 2. POWTRAN AC Drives voltage: AC 220/380/440//575/690/1140V, -15% ~ 15%. 3.Output frequency: 0.00~3200.00Hz 4.Central control module based on DSP, realize high-speed and high performance control. 5.Integrate V/F control, V/F+PG control, Sensorless Vector control , Vector+PG control. 6.3 space voltage vector waveform generation methods. 7.Dead compensate function, realize low frequency and high output torque control. 8.AC Drives has automatic slip compensate. 9. At most 7 steps speed control and 8 steps acceleration control can be realized. 10.6 programmable output control terminals. 11. Internal PID function, realize high performance closed loop control. 12.Can add PID regulate DC braking system to AC Drives. 13. Speed pursue starting and restart after momentary power loss. 14.Forced communicated function, support standard RS485 and Modbus, supply remote keyboard control function. 15.Special converse module (IGBT) temperature control and display function, adjustable fan control, timely reduce motor noise and temperature. 16.High-efficient faults inquiry and record function, conveniently obviate the fault. 17.Parameter protection function. 18. Unique design, making frequency converter least power consumption. 19.Outstanding behave 3-phase AC synchronous motor of permanent magnetism control. 20.Control mode: Vector control with PG (VC), sensorless vector control (SVC), V/F control. 21.Overload capacity: 150% rated current for 60 s (SVC), 180% rated current for 10 s (VC). 22.Multi-functional Quick/Jog key: Access common used parameter quickly. 23. Ambient temperature: -10~50ºC. 24.Altitude: 0~1000m, it would cause power derating in 1,000~4,000m. 25.30 kinds of protection function in AC Drives. 26. User can plug in option card to achieve specialized inverter for different application. 27.Avoid high temperature and moisture and avoid being wetted due to raining, with the humidity below 90%RH (not dewing). Specicfication Item Specification Power Voltage and frequency levels Single-phase 220,50/60Hz Three-phase 220V,50/60Hz Three-phase 480V,50/60Hz 380,50/60Hz  Three-phase 690V,50/60Hz Allowable fluctuation Voltage:±10% Frequency:±5% Control system High performance vector control inverter based on DSP Output frequency Vector control:0 to 300Hz V/F control:0 to 600Hz Control method V/F control, vector control W/O PG, vector control W/ PG Automatic torque boost function Realize low frequency (1Hz) and large output torque control under the V/F control mode. Acceleration/deceleration control Straight or S-curve mode. Four times available and time range is 0.0 to 6500.0s. V/F curve mode Linear,square root/m-th power,custom V/F curve Over load capability G type:rated current 150% - 1 minute, rated current 180% - 2 seconds F type:rated current 120% - 1 minute, rated current 150% - 2 seconds Maximum frequency Vector control:0 to 300Hz V/F control:0 to 600Hz Carrier Frequency 0.5 to 15kHZ;automatically adjust carrier frequency according to the load characteristics. Input frequency resolution Digital setting: 0.01Hz Analog setting: maximum frequency×0.025% Start torque G type: 0.5Hz/150% (vector control W/O PG) F type: 0.5Hz/100% (vector control W/O PG) Speed range 1:100 (vector control W/O PG) 1:1000 (vector control W/ PG) Steady-speed precision Vector control W/O PG: ≤ ± 0.5% (rated synchronous speed) Vector control W/ PG: ≤ ± 0.02% (rated synchronous speed) Speed control accuracy Vector control W/O PG≤±0.3% ( rated synchronous speed ) Torque response ≤ 40ms (vector control W/O PG) Torque boost Automatic torque boost; manual torque boost(0.1% to 30.0%) DC braking DC braking frequency: 0.0Hz to max. frequency, braking time: 0.0 to 36.0 seconds, braking current value: 0.0~100.0s Jogging control Jog Frequency Range: 0.00Hz to max. frequency; Jog Ac/deceleration time: 0.0s~6500.0s Multi-speed operation Achieve up to 16-speed operation through the control terminal Built-in PID Easy to realize closed-loop control system for the process control. Automatic voltage regulation(AVR) Automatically maintain a constant output voltage when the voltage of electricity grid changes Torque limit and control "Excavator" feature - torque is automatically limited during the operation to prevent frequent overcurrent trip;the closed-loop vector mode is used to control torque Running method Keyboard/terminal/communication Communication RS485/RS232/CANBUS/PROFIBUS The optional completely isolated RS485/RS232/CANBUS/PROFIBUS communication module can communicate with the host computer. Product standard Product adopts safety standards. IEC61800-5-1:2007 Product adopts EMC standards. IEC61800-3:2005 Cooling method Forced air cooling and natural air cooling Front Side keyboard with rotary and quick button---can be taken out Bottom Top  安装方式----落地式，法兰式，壁挂式   应用 ---与各种AC三相电动机，泵兼容。  接线图 交易会 联系Cindy Chen女士，微信和Whatsapp：+8618379497346 或者您直接发送询问，我们将尽快答复！