8m Heavy Duty Emergency LED Light Telescopic Mast Tower

Product Description What is a Pneumatic Mast?            Pneumatic masts are a type of elevation solution using compressed air to raise the central column to its extended height. The masts can either be locking, which each section locks into place once it reaches its maximum extension - designed for safety and long term use( do not lift down the mast), or non-locking where each section sits on cushion  of air- more appropriate for short time using. Common application Telecommunications, Surveillance, Broadcasting, Disaster Recovery, Site Surveys, Energy Production,  Site so on. Mast specification Available Extended height:2m to 30m Head load capacity:5kg to 300kg. Lift operation choose If no electricity and head load is not heavy, lift control could be foot pump or hand pump---manual lift. If thers is electricity and head load is heavy, lift control should be air compressor, easily and quickly. Specification                                                          8m heavy duty emergency LED light telescopic mast tower Model No. tal-p8-2.2-50 Material aluminum alloy surface treatment  Hard anodizing  Color Bronze Extended height 8.0m Retracted height 2.2m Max head load 50kg Sections  5sections  Mast net weight 35kg( without  accessories) Max wind load 100km/h ( with guy wire fixed) top flange 100mm/8.5mm (diameter/thickness) bottom base 190mm/18mm(diameter/thickness) Detail Operation steps 1.check the mast in good condition 2.fixed the mast on the ground. tripod fixed diameter is 3.4m,guy wire fixed diameter is 8m. 3.air inlet of control valve connect with air compressor. 4.air outlet of control valve connect wtih the mast. 5. once all mounted, you must keep the lifting control valve handle bar in middle location. (it make the air do not come into mast) 6.open the air compressor switch, at same time adjust the pessure regulating switch to reach 0.2MPa which the pressure gauge shows. 7.then pull up the lifting valve handle bar, mast will rise. 8.if you want to make the mast stop in some height, just make the handle bar in middle. 9. when lift down the mast, please pull down the lifting control valve handle bar.. Packing & Delivery Package information based on different specifitation extended height less than 9m  also weight less than 70kg packed into a  carton, inner space filled with foam to protect mast.  wooden case if customer request. extended height more than 9m  also weight more than 70kg packed into plywood case, inner space filled with foam to protect mast. Operation precaution No overloading.  Ensure the area in which the mast is deployed is free of obstructions and overhead power lines. Any abnormal phenomena( such as inflexible or stuck) occurs when lifting, you should stop it immediately, identify the reasons, and lift it after cleaning troubles. Note: if special request, please confirm with our technician.  Other Specification Pneumatic telescopic mast MODEL No. Extended  Height (m) Retracted  Height (m) Bottom  OD (mm) TOP OD (mm) Section NO. Head-load (KG) TAL-2.0-1.3-150-AT8 2 1.3 118 98 2 150 TAL-3.0-1.5-50-AT8 3 1.5 98 66 3 50 TAL-4.0-1.3-20-AT8 4 1.3 87 43 4 20 TAL-4.5-1.65-50-AT9 4.5 1.65 118 66 4 50 TAL-5.0-1.7-40-AT8 5 1.7 98 51 4 40 TAL-5.0-1.75-30-AT9 5 1.75 98 51 4 30 TAL-6.0-1.7-30-AT8 6 1.7 118 51 5 30 TAL-6.0-1.75-12-AT8 6 1.75 87 28 5 12 TAL-6.0-2.0-50-AT9 6 2 118 66 4 50 TAL-6.0-1.95-30-AT8 6 1.95 87 43 4 30 TAL-6.0-1.5-25-AT9 6 1.5 118 51 5 25 TAL-7.0-1.95-40-AT8 7 1.95 118 51 5 40 TAL-8.0-1.8-50-AT9 8 1.8 160 51 7 50 TAL-8.0-2.2-60-AT7 8 2.2 140 66 5 60 TAL-8.0-2.0-25-AT8 8 2 118 36 6 25 TAL-9.0-2.15-30-AT8 9 2.15 140 51 6 30 TAL-10.0-2.4-30-AT7 10 2.4 140 51 6 30 TAL-12.0-2.7-250-AT8 12 2.7 279 140 7 250 TAL-15.0-3.5-150-AT9 15 3.5 229 98 6 150 TAL-16.0-3.0-30-AT8 16 3 180 51 8 30 TAL-18.0-3.0-100-AT8 18 3 279 66 10 100 TAL-20.0-3.3-55-AT8 20 3.3 229 66 9 55 TAL-30.0-4.0-30-AT8 30 4 316 51 13 30 NOTE: above specification does not include all we can do. Our Company Talents is a Chinese company that design, manufacture and supply a range of manual/electric/pneumatic/hydraulic operated telescopic masts and lifting devices that made of aluminum alloy tube, stainless steel tube, fiberglass tube and carbon fiber tube. Talents was founded in 1995, since then we focus on offering customers high quality, durable, applied and economic masts. We are serving our long-term customers from the five Continents and the four Oceans. Our masts are CE certified, we have been a golden supplier on Alibaba since 2007, we are keeping with our customers an one for one timely information feedback, we have organized an expert team for quality control and inspection system and have Multi-way fast delivery channels, we are supplying one year free after-sale warranty to the buyer. We think outside the box and are continually developing new products to meet customer requirements, what you are asking for is our motive power of task, we wish one of our products will well-meet what you demand. Welcome to inquiry Any questions or inquiry, welcome to contact us at any time! Design and manufacture of telescopic and mast systems. Our reputation is built on product quality.