20ft Truck Vehicle Pneumatic Telescoping Surveillance Mast

Product Description What is a Pneumatic Mast?            Pneumatic masts are a type of elevation solution using compressed air to raise the central column to its extended height. The masts can either be locking, which each section locks into place once it reaches its maximum extension - designed for safety and long term use( do not lift down the mast), or non-locking where each section sits on cushion  of air- more appropriate for short time using. Classification of masts Model"AT8"---no cable and no lock, for Short time using and small head load. Model"AT9"---with lock. for long time using and large head load. Model"AT7"---with cable. for mounting camera, lights or antenna. Common application Telecommunications, Surveillance, Broadcasting, Disaster Recovery, Site Surveys, Energy Production,  Site so on. Mast specification Available Extended height:2m to 30m Head load capacity:5kg to 300kg. Lift operation choose If no electricity and head load is not heavy, lift control could be foot pump or hand pump---manual lift. If thers is electricity and head load is heavy, lift control should be air compressor, easily and quickly. Specification Specification 20ft truck vehicle pneumatic telescoping surveillance mast Model No. TAL-P6-2.5-100-AT8 Extended height 6.0m Retracted height 2.5m Max head-load 100kg Mast self weight( without tripod) around 90kg Mast sections No. 4 sections Section No.& tube OD*Wall thickness 1# 140/5.0mm; 2# 118/4.0mm  3# 98/4.0mm;   4# 82/3.5mm Acessories Mount model ground  mounted Accessories Air compressor------------------------------------------1pc 110V~230V for choose working pressure:0.2MPa Air hose-----------------------------------------------------1pc Control invalve-------------------------------------------1pc Top flange--------------------------------------------------1pc Car clamps---------------------------------------------------------1pc   Detail 20ft truck vehicle pneumatic telescoping surveillance mast Mast material is aluminum alloy 6063-T5  Tube surface treatment is Hard anodizing  Color:Bronze and origin silver color for choose. Acessories for 12m portable field locking telescopic pneumatic mast . Operation steps 1.check the mast in good condition 2.fixed the mast on the ground.  3.air inlet of control valve connect with air compressor. 4.air outlet of control valve connect wtih the mast. 5. once all mounted, you must keep the lifting control valve handle bar in middle location. (it make the air do not come into mast) 6.open the air compressor switch, at same time adjust the pessure regulating switch to reach 0.2MPa which the pressure gauge shows. 7.then pull up the lifting valve handle bar, mast will rise. 8.if you want to make the mast stop in some height, just make the handle bar in middle. 9. when lift down the mast, please pull down the lifting control valve handle bar.. Packing & Delivery Package information based on different specifitation extended height less than 9m  also weight less than 70kg packed into a  carton, inner space filled with foam to protect mast.  wooden case if customer request. extended height more than 9m  also weight more than 70kg packed into plywood case, inner space filled with foam to protect mast. Certifications Other Specification Pneumatic telescopic mast MODEL No. Extended  Height (m) Retracted  Height (m) Bottom  OD (mm) TOP OD (mm) Section NO. Head-load (KG) TAL-2.0-1.3-150-AT8 2 1.3 118 98 2 150 TAL-3.0-1.5-50-AT8 3 1.5 98 66 3 50 TAL-4.0-1.85-250-AT8 4 1.85 180 140 3 250 TAL-4.0-1.3-20-AT8 4 1.3 87 43 4 20 TAL-4.5-1.2-30-AT7 4.5 1.2 140 51 6 30 TAL-5.0-1.75-110-AT8 5 1.75 140 82 4 110 TAL-5.0-1.75-30-AT9 5 1.75 98 51 4 30 TAL-6.0-1.7-30-AT8 6 1.7 118 51 5 30 TAL-6.0-1.75-12-AT8 6 1.75 87 28 5 12 TAL-6.0-2.0-50-AT9 6 2 118 66 4 50 TAL-6.0-1.95-30-AT8 6 1.95 87 43 4 30 TAL-6.0-1.5-25-AT9 6 1.5 118 51 5 25 TAL-7.0-1.95-40-AT8 7 1.95 118 51 5 40 TAL-8.0-2.5-250-AT8 8 2.5 229 118 5 250 TAL-8.0-2.2-60-AT7 8 2.2 140 66 5 60 TAL-9.0-2.15-30-AT8 9 2.15 140 51 6 30 TAL-10.0-2.4-30-AT7 10 2.4 140 51 6 30 TAL-10.0-2.4-15-AT8 10 2.4 118 36 6 15 TAL-12.0-2.7-250-AT8 12 2.7 279 140 7 250 TAL-12.0-2.6-15-AT9 12 2.6 140 36 7 15 TAL-15.0-3.2-30-AT9 15 3.2 160 51 7 30 TAL-15.0-3.5-150-AT9 15 3.5 229 98 6 150 TAL-16.0-3.0-30-AT8 16 3 180 51 8 30 TAL-18.0-3.0-100-AT8 18 3 279 66 10 100 TAL-20.0-3.3-55-AT8 20 3.3 229 66 9 55 TAL-30.0-4.0-30-AT8 30 4 316 51 13 30 Our Service OEM/ODM service available for the buyers Professional team for consulation, solution and designing Complete quality control system before delivery Multi-way fast delivery channel at buyer's option One year free after-sale warranty after delivery Our Company        Talents is a Chinese company that design, manufacture and supply a range of manual/electric/pneumatic/hydraulic operated telescopic masts and lifting devices that made of aluminum alloy tube, stainless steel tube, fiberglass tube and carbon fiber tube.       Talents was founded in 1995, since then we focus on offering customers high quality, durable, applied and economic masts. 23 years of our specialized knowledge and experience of the telescopic mast technology allows us to effectively supply the solutions and designing for the OEM/ODM and after-sale services of the mast to meet our customer's needs, whilst ensuring that we are achieving maximum efficiency and output at the same time. We are serving our long-term customers from the five Continents and the four Oceans        Our masts are CE certified, we have been a golden supplier on Alibaba since 2007, we are keeping with our customers  an one for one timely information feedback, we have organized an expert team for quality control and inspection system,  we have built up Multi-way fast delivery channels and we are supplying one year free after-sale warranty to the buyer. We  think outside the box and are continually developing new products to meet customer requirements, what you are asking for is our motive power of task, we wish one of our products will well-meet what you demand.