Pruftechnik VIBSCANNER 2 Vibration Measurement Tool - NEW

A unique handheld measuring device with which even untrained personnel can easily and effectively measure machine vibration on rotating machinery. Thanks to its forward-looking measuring principle and data acquisition across three axes with the triaxial sensor, all relevant condition information is recorded with the touch of a single button. And at a measurement speed that opens up fully new dimensions. Not only is the VIBSCANNER 2 a breakthrough in terms of measurement speed and precision, but also through its robustness and its intuitive operating concept. The intuitive graphical user interface assists the employee en route in taking repeatable error-free measurements. The device provides him/her with the exact information about the status of the measurement locations and the progress of the route. Following completion of the measurement route, the data pack containing the results can be downloaded onto the PC and sent to the maintenance specialist by email. This means that the maintenance specialist is always provided with high-quality vibration and machine condition data which he can analyze with the OMNITREND Center software. The bottom line: High-speed vibration measurement without any loss of data or quality while both the employee on site and the maintenance specialist save a great deal of time. Collecting and analyzing machine data efficiently Fast and comprehensive data collection Minimum training required thanks to intuitive graphical user interface Minimum time at machine thanks to parallel digital data processing Real triaxial data acquisition RPM Finder: innovative RPM determination based on signal Touch display: shock-proof, high-contrast, glove-enabled Technology VIBSCANNER 2 is the high-speed vibration data collector of the next generation. Depending on the filter settings, it measures overall values, spectra, and time signals synchronously in 3 axes. In combination with a triaxial sensor, VIBSCANNER 2 collects even more machine condition data per measurement location. Added value thanks to additional vibration data without affecting the measurement time Quick data acquisition thanks to synchronous measurement in 3 axes Clear channel assignment without any additional cable adapter A triaxial sensor measures vibration in 3 perpendicular directions at once, while a single-axis sensoronly measures in one direction at a time. Certain conditions such as cocked bearing or a bent shaft can be identified in a single measurement with a triaxial sensor. The bottom line: In combination with a triaxial sensor, VIBSCANNER 2 delivers even more comprehensive information per measurement location at the push of a button. This creates an overall image of the machine‘s health without affecting the measuring time. VIBSCANNER 2 – Technical data Parameter VIBSCANNER 2 Measurement channels Number 3 synchronous analog channels (X/Y/Z) Z channel (0 ... 50 kHz) -20 .. 20 V, input impedance: 78 kOhm IEPE Linedrive X/Y channel (0 ... 10 kHz) -20 .. 20 V, input impedance: 78 kOhm IEPE Dynamic range 109.5 dB (total) Sampling rate up to 131 kHz per channel Signal processing 3 x 24 bit ADCs Measuring range / Accuracy Vibration acceleration: dependent on used sensor Shock pulse: -10 dBsv to 80 dBsv /- 2 dBsv Fulfilled standard DIN ISO 2954:2012 (2-1 kHz, 10 Hz -1 kHz, 10-10 KHz) Display Type Capacitive touchscreen Optically bonded for high contrast and increased shock resistance Active area 95 x 54 mm [3 3/4” x 2 1/8”] Size 10.9 cm [4 1/3“] Color depth 16 million colors Viewing angle < 140° Operation Multi touch – gesture control Glove-compatible Illumination Background lighting, adjustable Ambient light sensor Yes Supply Type Li ion rechargeable battery Rated voltage 7.2 V Energy density 72 Wh Charge time, typical 5.0 h (0 ... 100 % @ 25 °C / 77 °F) 3.5 h (0 ... 80 % @ 25 °C / 77 °F) Charging temperature 10 °C ... 40 °C [ 50 °F ... 104 °F] Operating time, typical 12 h (continuous operation, rechargeable battery 100 %) 6 h (continuous operation, rechargeable battery 50 %) Power adapter 100-240 V~, 50-60 Hz (input) 12 V 3 A (output) Energy saving mode Yes Computer Processor ARM A9 - Quadcore 1 GHz Operating elements Touchscreen, ON/OFF key, Enter key Memory microSD card, 32 GB for measurement data, permanently installed 2 GB RAM USB 1 x USB 2.0, device interface RFID RFID reader module for PRÜFTECHNIK transponder ALI 50.628-25 Complies with ISO 14443a and ISO 15693 Reading distance: 2...3 cm (13/16” ... 1 3/16”) WiFi IEEE 802.11a/b/g/n/ac Throughput: < 200 Mbps Security: WPA2 Stroboscope Frequency range: 0.1 – 1000 Hz Resolution: 0.06 1/min. LEDs: Risk group 1 per IEC 62471 LED 1x RGB LED (display for battery status and charging process) Environment / Mechanical system Connections Socket for power adapter Micro USB for data cable Plug-in connector (8-pole) for signal cable Housing 2-component housing: PC and ABS Sheath: TPE, black Dimensions 203 x 143 x 76mm (LxWxH) [8 x 5 5/8 x 3"] Weight approx. 1.0 kg [35.3 oz] Degree of protection IP65, dust-proof and spray water-protected Temperature range Operation: -10 °C ... 50 °C [ 14 °F ...122°F ] Storage: -20 °C ... 60 °C [-4 °F ... 140°F ] Air humidity 0 ... 90 %, non-condensing Certifications CE, RoHS, FCC, FCC/IC Pruftechnik VIBSCANNER 2 Vibration Measurement Tool - NEW