Silicone Thermal Conductive Pad1.2~8w Thermal Gap Filler Pad For Heatsink CPU GPU Cooling

As for thermal conductive pad we have several types: 1. Normal type: 1.2w/m-k,click here 2.High thermal conductivity type: 2w/m-k~4w/m-k,click here 3.Ultra-high thermal conductivity type: 5w/m-k~8w/m-k,click here 4.Thermal pad with silicone cloth, click here 5.Thermal pad with fiberglass, click here 6.Thermal pad with strong adhesive like 3M adhesive, click here TP120 is one kind of basic thermal conductive pad.Silicone type with soft rubber material.Thermal silicone pad is a very cost-effective general economic thermal gap filling gasket, soft with its own micro-stick, easy assembly. Under low compressing force to show good thermal conductivity and electrical insulation properties. Bedding on the gap between the heat device and the heat sink or the machine shell to extrude air to reach the full contact forming a continuous thermal conduction.Using heat sink or machine shell as a cooling device can effectively increase the cooling area to achieve a good cooling purposes. Test item Test method Unit TP120 Color Grey/white Thickness ASTM D374 mm 0.3~15 Specific gravity ASTM D792 g/cm³ 1.8 Hardness ASTM D2240 Shore C 10~45 Temperature endurance EN344 ℃ -40~+200 Voltage endurance ASTM D149 KV/mm >5.0 Flame rating UL-94 V-0 Conductivity ASTM D5470 w/m-k 1.2 Tips: 1.The original size is 200mmx400mm, 300mmx400mm and it is decided by the machine.However, it can die-cut to any size by machine again. So we can offer you the different size you need. 2.As for color, the general is grey and white.If you need other color,please tell me. 3.As for thermal conductivity,if you need others,also please let me know.  Usage  Step 1 Clear the surface where you are going to paste the thermal pad;   Step2 Tear the protective film of one side and remember do not tear the protective film of both sides in the same time to reduce the contact times and scare of the thermal pad avoiding the damage of thermal pad stickiness and thermal conductivity.   Step3 Paste the side without protective film on the products, then tear the other side protective film, then install your electronic components on the thermal pad. After installation, press slightly and let it stay for a while to ensure the thermal pad fixed well.    Application          Graphic/video card/memory           High-speed hard disk driver                    Memorymodule South and North Bridge       Heat sink of micro heat tube                                    Control device of car engine                                                Mobile phone              Portable electronic devices                                  New energy car electronic device                                         Led lighting   If you are interested in this type or need other types pls do not hesitate to contact me for more details. Sky-ever welcome your inquiry,click here !