LCP Silicone Thermal Pad With One Side Silicone Insulation Cloth

LCP is a value of the thermal interface material. The material is made on the base of coating thermally conductive polymer on fiberglass silicone tape coated substrate for easy to process and assembly. The softness and high adhesive can be used in filling the air gap between the PC board and the radiator or metal case. And its high adhesive is suitable for low stress shock absorption. Single-sided stickiness and puncture resistance is an electrical insulation material for the use of filling cooling insulation for activities or with the needle irregular heaters. Also it can also be used for thermal conductive between high-voltage bare wire devices and heat sink. Features:  Only one side is sticky  Enhanced anti-puncture, shear and tear resistance  High fit, low-hardness gap filling material  Strong electrical insulation Applications:  Power supply module  Car battery pack  Power conversion equipment  Car equipment / charger  Where heat is to be transmitted to a rack, chassis, or other heat sink Physical Properties: Test Item Test Method Unit LCP100 Test Value LCP150 Test Value Color Visual - White&Pink White&Pink Thickness ASTM D374 mm 0.5~10 0.5~10 Hardness ASTM D2240 Shore 00 40~80 40~80 Specific Gravity ASTM D792 g/cm3 2.1 2.5 Tensile Strength ASTM D412 Mpa 2.5 2.5 Elongation ASTM D412 % - - Tear Strength GBT 529-2008 KN/m 4.2 4.2 Breakdown Voltage ASTM D149 KV/mm ≥8 ≥8 Volume Resistivity ASTM D257 Ω·cm 1×1013 6×1013 Continuous Use Temp EN344 ℃ -40~150 -40~150 Flame Rating UL94 - V-0 V-0 Weight Loss @150℃240H % ≤0.5 ≤0.5 Dielectric Constant ASTM D150 @1MHz 5.2 5.7 Thermal Conductivity ISO 22007-2 W/m·K 1.0 1.5 Standard size：200mm×400mm，300mm×400mm；Customized size available;  For more , please kindly feel free to contact rita(at)szutd  com