Safety Valve Calibration Stand

Safety Valve Calibration Stand (P/N: P1035)   Standards:       · API 526    · API 527    · API-576    · ANSI-NB-23   Application: Safety valve calibration stand/safety relief valve test stand is designed for performance test on direct loaded or pilot operated safety valves, such as valves’set pressure, blow-down pressure, leakage and etc.   Technical Data:             · Test pressure: 0-70MPa             · Valve size: DN 10—DN600mm             ·  Valve Tyep: flange or threaded             · Test medium: Nitrogen, Air or Water (Optional)             · Test port: 1port             · Clamping Method: Hydraulic cylinder with 3claws station             · Pressure precision: 0.4 class pressure gauge (Optional )             · Pressure Transducer: ±0.5% accuracy             · Driven air: 6-8bar (workshop air)              · Power supply: 380V AC, 50Hz (Optional)             · Dimension: 1300×800×1200mm       Features:             · Air-operated pump/booster as the pressure source, and the system equipping with a cylinder allows continuous test.             · User configuration on testing pressure and rate of pressure rise is allowed.             · Wide range of high pressure output.             · All high pressure valves, pump, tubing and fittings made in USA with 316SS guarantee the pressure precision and stability.             · Most of the liquid and gases medium are applicable.             · Emergency stop system protects operators and equipment to the utmost extent.