Quick Details
- Nominal Pressure:0.6-4.0 MPa
- Ambient Temperature:-25℃~60℃
- Protection Class:IP65, IP68
- Liner Material:PTFE, PFA, F46, PU, NE
- Electrode Material:SUS316, HB, HC, Ta, Ti
- Accuracy:0.5%, 0.2%
- Output signal:4-20mA, RS485, RS232, Hart
- Flow Rate:0.5m/s-15m/s
- Processing Time:7-30
- Port:shanghai/qingdao/tianjin/guangzhou
- Supply Ability: 5000 Sets Per Month
- Brand Name:Philemon
- Place of Origin:China
- Brand Name:Philemon
Introduction and Application
High accuracy water electromagnetic flow meter is hallmarked by its high performance and reliability based on successful, field-proven technology. It is being widely used in industries such as
petroleum, chemical engineering, iron and steel, food, electricpower, paper making, water treatment, petrochemical, medicine etc.
Features
Measurement depends on fluid density, humidity, temperature, pressure and conductivity.
There is no obstructive in the conduit and no pressure drop, and the straight pipe required is relatively short.
The sensor is equipped with the advanced processing technology that provides excellent immunity to negative pressure.
LCD display of the converter makes it easy to read during daylight and in darkness.
Parameters can be set up using infrared touch nubs no need to open the cover of the converter.
Automatic alarm functions for selfdiagnosis, empty load test, high and low limit of flow, two-stage flow value, etc.
It is applicable not only to general process, but also in tough applications such as mining, papermaking, pastry, etc.
High pressure sensor with PFA liner is resistant to high pressure and negative pressure, and available to chemistry and corrosive solution.
Technical Performance Parameters
Model
DN6~DN3000mm
Nominal Pressure
0.6~1.6MPa(2.5Mpa/4.0Mpa/6.4Mpa...42Mpa)
Accuracy
±0.5%,±0.3%or±0.2% are selectable
Liner material
Teflon,PFA,F46,Neoprene,Polyurethane
Electrode Type
General type ,scraper type and replaceable type
Electrode material
Stainless steel SUS316,Hastelloy C,Titanium,Tantalum Platinumiridium,
Stainless steel covered with tungsten carbide
Mediem temperature
Integrate type
-20°C~+60°C
Remote type
Neoprene & Polyurethane Liner
-10°C~+80°C
PTFE Liner /PFA Liner /F46 Liner
-10°C~+160°C
Ambient Temperature
-25°C ~+ 60°C
Ambient Humidity
5~100%RH(relative humidity)
Medium Electrical
conductivity
≥5μ s/cm
Measuring Range
1500:1,flow rate<15m/s
Structure type
Integral type,remote type,submersible type,ex-proof type
Protection Class
IP65,IP68(optional)
Ex-proof Mark
ExmdⅡT6
Product Standard
JB/T 9248-1999 Electormagnetic Flowmeter
Main performances of the electrode materials
Electrode material
Applications
sainless steel SUS316
Applicable in water,sewage and corrosive mediums.
Widely used in industries of petrol,chemistry,carbamide,etc
Stainless steel covered
with tungsten carbide
Applicable in mediums of no corrosive and low abrasion.
Hastelloy B(HB)
Having strong resistance to hydrochloric acid of any consistance which
is below bioling piont.
Also resistable against vitriol,phosphate,
hydrofluoricacid,organic acid etc which are oxidable acid,alkali and
non-oxidable salt.
Hastelloy C(HC)
Be resistant to oxidable acid such as nitric acid,mixed acid
as well as oxidable salt such as Fe+++,Cu++aStnd sea water
Titanium
Applicable in seawater,and kinds of chloride,hypochlorite salt,oxidable
acid (including fuming nitric acid),organic acid,alkali etc.
Not resistant to a pure reducing acid(such as sulphuric acid,hydrochloric
acid corrosion.
But if acid contains antioxidant is greatly reduce corrosion.
Tantalum
Having strong resistance to corrosive mediums that is similar with glass
Almost is applicable to all chemical mediums.
Except for hydrofluoric acid,oleum and alkali.
Platinum-iridium
Almost be applicable in all chemical mediums except for ammonium salt.
VELOCITY-FLOW RATE TABLE
Pipe Size
Min.Flow Rate
(0~0.5m/s)
Min.Flow Rate
(0~10m/s)
mm
inch
L/min,m3/h
L/min,m3/h
10
3/8
0 ~ 2 L/min
0 ~ 40 L/min
15
1/2
0 ~ 5 L/min
0 ~ 100 L/min
20
3/4
0 ~ 7.5 L/min
0 ~ 150 L/min
25
1
0 ~ 10 L/min
0 ~ 200 L/min
32
1.25
0 ~ 20 L/min
0 ~ 400 L/min
40
1.5
0 ~ 30 L/min
0 ~ 600 L/min
50
2
0 ~ 3 m3/h
0 ~ 60 m3/h
65
2.5
0 ~ 6 m3/h
0 ~ 120 m3/h
80
3
0 ~ 9 m3/h
0 ~ 180 m3/h
100
4
0 ~ 12 m3/h
0 ~ 240 m3/h
125
5
0 ~ 21 m3/h
0 ~ 420 m3/h
150
6
0 ~ 30 m3/h
0 ~ 600 m3/h
200
8
0 ~ 54 m3/h
0 ~ 1080 m3/h
250
10
0 ~ 90 m3/h
0 ~ 1800 m3/h
300
12
0 ~ 120 m3/h
0 ~ 2400 m3/h
350
14
0 ~ 165 m3/h
0 ~ 3300 m3/h
400
16
0 ~ 225 m3/h
0 ~ 4500 m3/h
450
18
0 ~ 300 m3/h
0 ~ 6000 m3/h
500
20
0 ~ 330 m3/h
0 ~ 6600 m3/h
600
24
0 ~ 480 m3/h
0 ~ 9600 m3/h
700
28
0 ~ 660 m3/h
0 ~ 13200 m3/h
800
32
0 ~ 900 m3/h
0 ~ 18000 m3/h
900
36
0 ~ 1200 m3/h
0 ~ 24000 m3/h
1000
40
0 ~ 1350 m3/h
0 ~ 27000 m3/h