Quick Details
- Processing Time:20 to 25 workdays
- Port:Shenzhen
- Supply Ability: 50000 Pieces Per Week
- Brand Name:Kohon
7 segment led display specification of item KHN10801CSR1D-1
1) Type: 1 digit 7
segment led display super red 0.8" digit height, Common Cathode and Anode both available
Normal Red is
about 30 mcd for brightness
Super Red is
about 50 mcd for brightness
Ultra Red is
about 70-80 mcd for brightness
2) Image of 0.8 inch 7 segment led display
3) 0.8" single digit 7 segment led
display sizes and pins
4) 7 segment led display common anode
circuit diagram
5) 0.8 inch 7 segment led display datasheet
Electrical and optical parameters:
Parameter
Symbol
Min
Type
Max
Unit
Test Condition
Luminous Intensity
Iv
50
/
70
mcd
If =20mA
Peak Wavelength
λP
/
/
/
nm
If =20mA
Dominant Wavelength
λd
629
/
635
nm
If =20mA
Forward Voltage
Vf
1.8
2.0
2.5
V
If =20mA
Reverse Current
Ir
/
/
50
μA
Vr =5V
Forward Current(suggested)
If
3
5-10
20
mA
/
Absolute Maximum Ratings:
Parameter
Rating
Unit
Reverse Voltage
5
V
Power Dissipation
50
mW/chip
Operation Temperature
-20 to +85
°C
Storage Temperature
-20 to
+85
°C
Storage Humidity
45%-85%
RH
Soldering Temperature(Wave soldering)
260°C in 3s,
Iron soldering<360°C
Peak IF(mA)(1/10 duty cycle 0.1ms pulse width)
80
mA/chip
Continuous Forwrd Current
20
mA/chip
Similar products, 0.8 inch 7 segment led display
B. 7 segment led display common anode and common
cathode
Common Cathode, all of the
cathode(negative terminals) of the segment led are connected and brought out to a common pin.
Common
Anode, all
of the anode(positive terminals) of the segment led are connected and brought out to a common pin.
C. General 7 segment led display
types
Unit of 1-digit,
2-digit, 3-digit, 4-digit, 5-digit, 6-digit and Custom;
Digit height from 0.25 inch to 5 inch;
Emitting colors red, yellow, blue, orange, white, yellow-green, pure green;
Surface colors black, grey, red, white;
Connecting by common anode or common cathode;
Lens colors white, yellow, red, green, transparent or
water clear;
Pin diameter ∅0.45mm, 0.51mm, 0.6mm...
Pin length from 7.6mm to 38mm, generally 10.28mm,
straight and bent type