ADSS&OPGW Tension Set

Dead end grip for ADSS(ANZ) Component    Inner armor rods, outer armor rods, thimble, U-shaped hanging loop, extension loop, bolt, nut, etc.    Characteristic    1. Stress is distributed equally, without stress focus. It can protect optical cables very well. 2. Under the condition of not exceeding the intensity of cable's side pressure, it has higher grip power for the cable, and can support higher tensile force. 3. The grip power for the cable is not less than 95% of rating's pulling resisting intensity of the optical cable, completely satisfying the needs of setting up the cable.    Conditions For The Usage    1. Terminal poles/towers;  2. Poles/towers with corner angles greater than 25° 3. Conjoint poles/towers of the optical cables or poles/towers with larger differences in terms of height.    Intensity According to the requirement of customers, 30kN, 70kN, 100kN, 120kN, etc, can be supplied.   Select Chart Model Grip(KN) Suggested Span(m) Length of Inner Armor Rods(mm) Length of Outer Armor Rods(mm) Estimated Weight (KG) Color ANZ-16-* * 16 100 1300 1000 2.7 Yellow ANZ-25-* * 25 101 -200 1700 1300 3.4 Yellow ANZ-30-* # 30 201 -300 1900 1500 3.9 Yellow ANZ-40-* # 40 301 -400 2100 1700 4.1 Yellow ANZ-50-* # 50 401 -500 2300 1900 4.5 Yellow ANZ-60-* # 60 501 -600 2200 1700 4.8 Yellow ANZ-70-* # 70 601 -800 2700 2200 5.0 Yellow ANZ-80-* # 80 801 -1000 2800 2400 5.5 Yellow Note: representing the outer diameter of the optical cable (mm).