Ftth Modem Fiber Optic Ont Router Pon Onu 1GE 1FE WIFI XPON ONU

Short Description: Model Number: HUR3108XR Application: FTTH FTTB FTTX Network PON Interface: 1 GPON BOB (Class B+/Class C+) Transmission distance: 20KM Wavelength: TX: 1310nm, RX: 1490nm Optical Interface: SC/UPC Connector LAN Interface: 1 x 10/100/1000Mbps(GE) and 1 x 10/100Mbps(FE) auto adaptive Power Supply: DC 12V/1A Power Consumption: ≤6W Certification: CE RoHS ISO9001 Warranty: 1 Year 1. Overview * HUR3108XRis designed as HGU (Home Gateway Unit) in different FTTH solutions. The carrier-class FTTH application provides different services access. * HUR3108XRis based on mature and stable, cost-effective XPON technology. * HUR3108XRadopts high reliability, easy management, configuration flexibility and good quality of service guarantees to meet the technical performance of EPON Standard of China Telecom CTC3.0 and GPON Standard of ITU-TG.984.X 2. Functional Feature * Support EPON/GPON mode and switch mode automatically * Support Route mode for PPPoE/IPoE/Static IP and Bridge mode * Support IPv4and IPv6 Dual mode * Support 4G WIFIand 2*2 MIMO * Support LAN IP and DHCP Server configuration * Support Port Mappingand Loop-Detect * Support Firewall function andACL function * Support IGMP Snooping/Proxy multicast feature * Support TR069 remote configuration and maintenance * Specialized design for system breakdown prevention to maintain stable system 3. Hardware Specification Technical item Details PON Interface 1 GPON BOB (Class B+/Class C+) Receiving sensitivity: ≤-27dBm/≤-29dBm Transmitting optical power: +0.5~+5dBm/+2~+7dBm Transmission distance: 20KM Wavelength TX: 1310nm, RX: 1490nm Optical Interface SC/UPC Connector Design Scheme RTL9603C+RTL8192FR BOB(i7525BN) Chip Spec CPU 950MHz,DDR2 128MB Flash SPI Nor Flash 16MB LAN Interface 1 x 10/100/1000Mbps(GE) and 1 x 10/100Mbps(FE) auto adaptive Ethernet interfaces. Full/Half, RJ45 connector Wireless Compliant with IEEE802.11b/g/n, Operating frequency: 2.400-2.4835GHz support MIMO, rate up to 300Mbps, 2T2R,2 external antenna 5dBi, Support: Multiple SSID Channel: Auto Modulation type: DSSS, CCK and OFDM Encoding scheme: BPSK, QPSK, 16QAM and 64QAM LED 7 LED, For Status of WIFI,WPS,PWR,LOS,PON,LAN1~LAN2 Push-Button 3,For Function of Reset, WLAN, WPS Operating Condition Temperature: 0℃~+50℃ Humidity: 10%~90%(non-condensing) Storing Condition Temperature: -30℃~+60℃ Humidity: 10%~90%(non-condensing) Power Supply DC 12V/1A Power Consumption ≤6W Dimension 180mm×107mm×28mm(L×W×H) Net Weight 0.2Kg 4. Panel lights Introduction Pilot Lamp Status Description WIFI On The WIFI interface is up. Blink The WIFI interface is sending or/and receiving data (ACT). Off The WIFI interface is down. WPS Blink The WIFI interface is securely establishing a connection. Off The WIFI interface does not establish a secure connection. PWR On The device is powered up. Off The device is powered down. LOS Blink The device doses not receive optical signals or with low signals. Off The device has received optical signal. PON On The device has registered to the PON system. Blink The device is registering the PON system. Off The device registration is incorrect. LAN1~LAN2 On Port (LANx) is connected properly (LINK). Blink Port (LANx) is sending or/and receiving data (ACT). Off Port (LANx) connection exception or not connected. 5.Application * Typical Solution：FTTH(Fiber To The Home) * Typical Business：INTERNET、IPTV、WIFI etc