FTTH Fiber Optic Network Router 1GE+1FE+WIFI+1POTS Dual Pon Port XPON GEPON EPON GPON ONU

Short Description: Model Number: HUR2201XR Application: FTTH FTTB FTTX Network Transmission Distance: 20km PON Interface: 1 GPON BOB Class B+/Class C+ Wavelength: Tx1310nm/Rx1490nm LAN Interface: 1 x 10/100/1000Mbps(GE) and 1 x 10/100Mbps(FE) Optical Interface: SC/UPC connector Single Fiber Power Consumption: ≤6W DC power supply: 12V 1A Certification: RoHS/CE/ISO9001 Warranty: 1 Year Type: FTTH Solutions Product Description 1. Overview * HUR2201XR is designed as HGU (Home Gateway Unit) in different FTTH solutions. The carrier-class FTTH application provides different services access. * HUR2201XR is based on mature and stable, cost-effective XPON technology. * HUR2201XR adopts high reliability, easy management, configuration flexibility and good quality of service guarantees to meet the technical performance of EPON Standard of China Telecom CTC3.0 and GPON Standard of ITU-TG.984.X. 2. Functional Feature * Support EPON/GPON mode and switch mode automatically * Support Route mode for PPPoE/IPoE/Static IP and Bridge mode * Support IPv4 and IPv6 Dual mode * Support 4G WIFI and 2*2 MIMO * Support SIP Proctolfor Voip Service * Support LAN IP and DHCP Server configuration * Support Port Mapping and Loop-Detect * Support Firewall function and ACL function * Support IGMP Snooping/Proxy multicast feature * Support TR069 remote configuration and maintenance * Specialized design for system breakdown prevention to maintain stable system 3. Hardware Specification Technical item Details PON Interface 1 GPON BOB （Class B+/Class C+） Receiving sensitivity: ≤-27dBm/≤-29dBm Transmitting optical power: +0.5~+5dBm/+2~+7dBm Transmission distance: 20KM Wavelength TX: 1310nm, RX: 1490nm Optical Interface SC/UPC Connector Design Scheme RTL9602C+RTL8192FR+Si32192 BOB(RTL8290B) Chip Spec CPU 625MHz,DDR2 64MB Flash SPI Nor Flash 16MB LAN Interface 1 x 10/100/1000Mbps(GE) and 1 x 10/100Mbps(FE) auto adaptive Ethernet interfaces. Full/Half, RJ45 connector Wireless Compliant with IEEE802.11b/g/n, Operating frequency: 2.400-2.4835GHz support MIMO, rate up to 300Mbps, 2T2R,2 external antenna 5dBi, Support: Multiple SSID Channel: Auto Modulation type: DSSS, CCK and OFDM Encoding scheme: BPSK, QPSK, 16QAM and 64QAM POTS interface 1 FXS, RJ11 connector Support: G.711/G.723/G.726/G.729 codec Support: T.30/T.38/G.711 Fax mode, DTMF Relay Line testing according to GR-909 LED 8 LED, For Status of WIFI、WPS、PWR、LOS、PON、LAN1~LAN2、FXS Push-Button 2,For Function of Reset,WPS Operating Condition Temperature: 0℃~+50℃ Humidity: 10%～90%（non-condensing） Storing Condition Temperature: -30℃~+60℃ Humidity: 10%~90%（non-condensing） Power Supply DC 12V/1A Power Consumption ≤6W Dimension 180mm×107mm×28mm（L×W×H） Net Weight 0.15Kg 4. Panel lights Introduction Pilot Lamp Status Description WIFI On The WIFI interface is up. Blink The WIFI interface is sending or/and receiving data (ACT). Off The WIFI interface is down. WPS Blink The WIFI interface is securely establishing a connection. Off The WIFI interface does not establish a secure connection. PWR On The device is powered up. Off The device is powered down. LOS Blink The device doses not receive optical signals or with low signals. Off The device has received optical signal. PON On The device has registered to the PON system. Blink The device is registering the PON system. Off The device registration is incorrect. LAN1~LAN2 On Port (LANx) is connected properly (LINK). Blink Port (LANx) is sending or/and receiving data (ACT). Off Port (LANx) connection exception or not connected. FXS On Phone has registered to the SIP Server. Blink Phone has registered and data transmission (ACT). Off Phone registration is incorrect. Off Phone registration is incorrect. 5.Application * Typical Solution：FTTH(Fiber To The Home) * Typical Business：INTERNET、IPTV、WIFI 、VOIP etc