Variable 50hz 22kw Ac Drive 3 Phase Frequency Inverter VFD Motor Control 220V 380v Controller Inverter

Variable 50hz 22kw ac drive 3 phase frequency inverter VFD motor control 220V 380v controller inverter MH300 Description MH300 high end series, owns two control models: open-loop&closed-loop vector control with high performance and best price that can drive asynchronous motor and synchronous PMSM ac motor(MH300P series). MH300 Series Technical Datasheet Basic Function Max Frequency V/F control: 0-3200Hz, vector control:1:300Hz Carrier Frequency 0.5Khz-16Khz, automatically adjust per load characteristics Input Frequency Resolution digital setting: 0.01Hz; analog setting: Max frequency x0.025% Control Mode VFD, SVC, FVC Starting Torque 0Hz/180%(FVC), 0.5Hz/150%(SVC), 0.5Hz/100%(V/F) Speed Range 1:1000(FVC), 1:200(SVC), 1:50(V/F) Steady Speed Precision ±0.02%(FVC) Torque Control Precision ±5%(FVC) Overload 150% rate current 60s; 180% rated current 3s. Torque Increase Automati torque enhancement; Manual torque improvement0.1%-30.0% V/F Curve three way: linear; multipoint; N-power V/F curve(1.2-power, 1.4-power, 1.6-power, 1.8-power, 2-power) V/F Separate 2 way: full separation, semi-detached Acceleration Deceleration Curve linear or S-curve plus deceleration. Four acceleration and the range deceleration times 0.0-6500.0s DC Brake DC brake frequency: 0.00Hz-Max frequency  Brake time: 0.0s-36.0s  Braking action current value:0.0%-100.0% Inching Control  Inching frequency range: 0.00Hz-Max frequency Inching deceleration time: 0.0s-6500.0s Simple PLC, Multistage Running Through built-in PLC or control terminal to realize Max 16 speed running  Bulti-in PID To realize the process control closed-loop control system Automatic Voltage Regulation(AVR) When the grid voltage changes, to keep output constant voltage Overpressure Loss Rate Control  Automatic limit of current voltage during operation to prevent overcurrent overvoltage to stop Fast Current Limiting Funication Maximum reduce overcurrent failure to protect the frequency converter normal run Torque Limitation and Control Feature of excavator, automatic limiation of torque during operation to prevent frequency overcurrent to stop; Closed-loop vector mode can realize torque control. Personalization Feature Outstanding Performance  With high performance current vector control technical to realize and control asynchronous and synchronous motor Instantaneous Stop Constantly In the instantaneous power fail, through load to feedback energy to make up the voltage reduce, to maintance frequency converter to keep running in a short time Rapid Current Limiting To avoid frequency converter frequent appear overcurrent fault. Virtual I/O Five groups of virtual DIDO to realize simple logic control Timing Control Timing control funication: setting range time 0.0Min-6500.0Min Multimotor Switching Four group motor parameters, can realize four motor to switch control. Motor Overheat Protection Select IO expansion card 1, analog input A13 can accept motor temperature sensor input(PI100, PI1000) Running  Input Terminal Standard: 5 digital input terminals  One of them support Max 100Khz high speed pluse input, 2 pcs analog input terminal, 1 only support 0-10V voltage input, 1 support 0-10V voltage input or 4-20mA current input Extension Ability: 5 digital input terminal 1 analog input terminal, support -10V∼10V voltage input, and support PI100/PI1000 Output Terminal Standard:  1 high speed pluse output terminals(can optional to be open collector type), support 0-100Khz square wave signal output 1 digital output terminal 1 relay output terminal 1 analog output terminal, support 0-20mA current output or 0-10V voltage output Extension Ability: 1 digital output terminal 1 relay output terminal  1 analog output terminal, support 0-20mA current output or 0-10V voltage output Command Source Operation panel given, control terminal, serial port given. It can switch by my ways. Frequency Source 10 frequency source: digital given, analog current given, pluse given, serial port given. It can switch by many ways. Auxiliary Frequency Source 10 kinds auxiliary frequency source. Flexible to realize auxiliary frequency fine turning, frequency synthesls. Display and Keyboard LED display Display parameters LCD display Optional part, chinese or english operation content Keyboard locking and funication selection Realize part of key or all to lock, or define the scope part of key, to prevent the wrong operation Protection Function Power on motor short circcuit detection, input output loss phase protection, overcurrent protection, overvoltage protection, under-voltage protection, overheat protection, overload protection, etc., Environment Using place Indoor, not exposed to direct sunlight, dust, corrosive gas, flammable gas, oil, fog, water vapor, water or salt Altitude   Environment Temperature -10℃~+40℃(environment temperature in 40℃~50℃, please derating use Humidity <95% RH, no water condense Vibration <5.9m/s²(0.6g) Store Humidity -20℃~+60℃ Rich Extensibility&Terminals: there are different extended cards for I/O point, CAN, Profibus and PLC. And various PG cards are provided for closed loop vector control. Product Components and Independent air fule: strong anti-interference power mainboard; infineon IGBT module with strong overload capability; indepent air fule prevents dustry entering and decreases temperature rise.   MH300 Feature Drive asynchronous motor and PMSM synchronous motor without encoder(MH300 series with self-tunning function ) with high rotating speed and wide speed range: SVC is with ±0.5% rotating speed, 1:100 speed range, <20ms torque response; FVC is with ±0.2%, 1:1000 and <2ms. Instant stop Non-stop Function&Overexcitation Braking Function: When instantly powers off or accidently voltage drops, frequency converter will low output speed and feedback power through load to guaranteen itself run in short times. Overexcitation braking function can effectively inhibit Bus voltage increasing to avoid frequent fault alarms, and realize fast braking. Excelent Side Wave&Multi Motors to Switch: MH300 series owns excelent side ware to meet one-driven-multi and long distance application. It supports four motors' parameter that realize the switch asynchronous motor and synchronous PMSM AC motor. Bulit-in Simple PLC to realize cycle operation at Max 16-segment constant time and speed. Pendulum Frequency Function &Vitual I/O: pendulum frequency function can improve colling's densityin textile and chemical fiber manufacturing industry; Through easy setting, inner logic control function can be customized.   Caution of Usage ♥ The avaliable voltage specifications are: 3 phase 380vac input output, 3phase 220vac input output, 1phase 220vac input 3phase 220vac output. ♥ Frequency converter can not be used as voltage inverter or converter. But its input voltage can be DC(±15% DC540V for 3phase 380V devices, ±15% DC310V for 3phase 220vac devices).   All Models Model Power Capacity /KVA Input Current /A Output Current /A Adaptive Motor KW HP Single phase Power: 220VAC, 50/60Hz MH300G2S0.4GS 1.0 5.4 2.3 0.4 0.5 MH300G2S0.75GS 1.5 8.2 4.0 0.75 1 MH300G2S1.5GS 3.0 14.0 7.0 1.5 2 MH300G2S2.2GS 4.0 23.0 9.6 2.2 3 Three phase Power: 280VAC, 50/60Hz MH300G4T0.4GS 1.0     0.4 0.5 MH300G4T0.75GS 1.5 3.4 2.1 0.75 1 MH300G4T1.5GS 3.0 5.0 3.8 1.5 2 MH300G4T2.2GS 4.0 5.8 5.1 2.2 3 MH300G4T3.7GS 5.9 10.5 9.0 3.7 5 MH300G4T5.5GS 8.9 14.6 13.0 5.5 7.5 MH300G4T7.5GS 11.0 20.5 17.0 7.5 10 MH300G4T11GS 17.0 26.0 25.0 11 15 MH300G4T15GS 21.0 35.0 32.0 15 20 MH300G4T18.5GS 24.0 38.5 37.0 18.5 25 MH300G4T22GS 30.0 46.5 45.0 22 30 MH300G4T30GS 40.0 62.0 60.0 30 40 MH300G4T37GS 57.0 76.0 75.0 37 50 MH300G4T45GS 69.0 92.0 91.0 45 60 MH300G4T55GS 85.0 113.0 112.0 55 70 MH300G4T75GS 114.0 157.0 150.0 75 100 MH300G4T90GS 134.0 180.0 176.0 90 125 MH300G4T110GS 160.0 214.0 210.0 110 150 MH300G4T132GS 192.0 256.0 253.0 135 175 MH300G4T160GS 231.0 307.0 304.0 160 210 MH300G4T200GS 250.0 385.0 377.0 200 260 MH300G4T220GS 280.0 430.0 426.0 220 300 MH300G4T250GS 355.0 468.0 565.0 250 370 MH300G4T280GS 396.0 525.0 520.0 280 420 MH300G4T315GS 445.0 590.0 585.0 315 470 MH300G4T355GS 500.0 665.0 650.0 355 530 MH300G4T400GS 565.0 785.0 725.0 400 600 MH300G4T450GS 630.0 883.0 820.0 450   Why Choose Us? 1. More than 15 Years' Experiece in PLC: MOCHUAN,  as an integrated industrial automation products supplies, owns mature business business chain: R&D team, qualified production equipments,  long-term international logistics cooperators, experienced pre-sale&after-sale engineer team to solve any problem in operating switch sensor, PLC, HMI, VFD and PMSM ac motor.    2. Experienced Engineering Team: besides trade company, Mochuan also is an engineering company. Every our engineer is with experienced practices in electric scheme, electric programming.    3. Realizable Quality: Every product is finished by the strict quality test system and checked by the professional engineer before delivery to ensure customers' benefit.    4. First-class Pre and After Service: professional pre-sale service to confirm each technical request and fully guarantee right product model to save time and money for you.    CE CERTIFICATES:    Factory Visit With four-year developing with each customer's great and kind cooperation each time, Mochuan Drives's foreign business and market has been blooming and thriving, epecially in India, Russia, United States, Canada, United Kingdom, Austrilia, etc., FAQ Q1. What information should be provided to get a clear model with quotaion? Please directly provide input output voltage, power, applied machine, specific requested function in inquiry.    Q2. They have EMC filter in the standard version? In option? EMC filter is option (under 7.5kw, EMC is bulit-in; >7.5kw, EMC filter is external).   Q3. They have input DC or AC REACTOR? In option? Both of input and output reactor is external and option. And there is a bulit-in DC reactor within VFD, but this reactor is to protection internal electric components;    Q4. They have a PID control? Multiple PID control references? Yes, there is one road PID control with two parameter groups, this means two different parameter setting can be configured and switched to each other. Multiple PID is multi road PID control, or multi PID control groups?    Q5. What is the maximum wiring distance between the output and the motor in the standard version? There are three options for different sites: - ≤20m, VFD and motor can be directly connected; -20m 100m, VFD and motor can be dirctly connected, except adjust carrier frequency, still need to add output AC reactor;   Q6. What is the minimum value of the power factor? The Maximum power factor is 0.95  (the better, the bigger power factor ). But the final power factor is depens on load type and motor's power factor. If motor's power is too little, VFD still can not make better power.