A Hot Air Blower To Remove Water From A Pipe Industrial Control Hot Air Blower

HWIR600G-5 high pressure industrial hot air blower is a hot air blower for pipe drying. It is used for heating, drying and dehumidification in the industry of pipeline cleaning and drying , as well as heating and heating up in large space. It is small in size, light in weight and easy to move. High thermal efficiency, continuous work without interruption, durable and precise in temperature control. Air inlet interface The machine adopts a tight air inlet interface, and the selection performance of the wind source is strong . The selection of air volume is large Users can choose their own air source or self distribution air source according to their needs, which is convenient and practical. Heat insulation of hot air blower Double insulation, machine shell is very strong, safe and reliable when used, and can work in high temperature environment for a long time. Temperature regulation of hot air blower The outlet is equipped with a temperature sensor, which can adjust the temperature according to the needs.The precision of temperature control is 1℃. Term ordering detection function (preventing fan reversal) The machine control system is equipped with motor sequence detection function.If the sequence error is wrong, the warning light will shine. Remote open control This machine has a remote control interface, which can remotely control the start and stop of the machine. Fan delay function In order to protect the heating core and prolong the service life of the heating core, the machine has a time delay function of downtime and blow drying. After the machine stops working, the hair dryer will blow off for a minute before it can be shut down. High heat exchange efficiency Ingenious design of wind tunnel let the air uniform through the inside and outside of the helical heating wire.Heat exchange near 100%,the loss of wind pressure is less.The heating core of the machine is designed to use the lower surface power density, and the heating temperature in the unit area is low, so the electric heat wire has a long service life. Air inlet air filtration system   This machine is equipped with high pressure blower inlet air filtration system to ensure clean air. Security It has overheating overload protection, power cut protection device, emergency stop switch, phase sequence protection, fully guarantee the safety of the equipment,do not produce exhaust gas, and meet the environmental protection,can keep operating 24 hours a day without stopping all year round. Optional wind regime Centrifugal fan   Medium pressure fan   High pressure fan       Classification Item Parameter Size    Overall machine size（L×W×H) 1000×430×580mm Inlet diameter 89mm Insulation layer Material Double layer heat preservation Heater Name Nickel chromium heating wire Heater power 6KW Heating wire life 10000h Air intake Blower 1500W high pressure fan Maximum wind volume 210m3/h Full pressure 20000pa Hot air vent Diameter 89mm   50mm   The maximum air volume of the outlet 200m3/h Full pressure 18000pa Maximum use temperature ≤350℃（Need to adjust small air intake） Maximum air outlet temperature in full air flow 120℃（Room temperature "0 centigrade" test） Power demand Power demand 380V Power 7.6KW Weight Weight 40KG