Quick Details
- Processing Time:10DAYS
- Port:TIANJIN
- Supply Ability: 100 Pieces Per Year
- Brand Name:HUAWEI
This type hot air-fan is suitable for heating, drying and dehumidification in food, pharmaceutical, electronic, printing, spraying,
cleaning and other industries, as well as heating and temperature rise in large area and large space. Its small size and
its light weight make it easy to move.it has high thermal efficiency, can work continuously, is
durable and accurate in temperature control.
Characteristics:
Air inlet interface
The machine adopts a tight air inlet interface, and the selection performance of the wind source is strong .
The selection of air volume is large
This machine can choose wind source or assemble wind source according to needs, so it is convenient and practical.
Heat insulation of hot air-fan
Multi-fiber insulation cotton is used for insulation, and the strong machine casing makes it safe and reliable,can maintain
long-term high temperature work.
Temperature regulation of hot air-fan
The air outlet is equipped with temperature sensor, which can adjust the temperature according to the needs. The precision of temperature control
is 1℃.
Term ordering detection function (preventing fan reversal)
This machine control system is equipped with motor item ordering sequence detection function.If the item ordering error,the item ordering warning indicator lights up.
Remote open control
This machine has a remote control interface, which can control the start and stop of the machine remotely.
Fan delay function
In order to protect the heating core and prolong the service life of the heating core, the machine has a time delay function of downtime and blow drying. After the machine stops working,
the hair dryer will blow off for a minute before it can be shut down.
High heat exchange efficiency
Ingenious design of wind tunnel let the air uniform through the inside and outside of the helical heating wire.Heat exchange near 100%,the loss of wind pressure is less.The heating core of
the hot air machine is designed to use the lower surface power density, and the heating temperature in the unit area is low, so the electric heat wire has a long service life.
Air flow regulating valve
The air inlet of the blower is equipped with a manual air volume regulating valve, and the air volume can be adjusted according to the needs.
Security
It has overheating overload protection, power cut protection device, emergency stop switch, phase sequence protection, fully guarantee the safety of the equipment, do not produce exhaust
gas, and meet the environmental protection.
Optional wind regime
Centrifugal fan Medium pressure fan High pressure fan(standard configuration of this machine is 750W medium pressure fan)
Selection tips: when choosing a hot air machine, it is necessary to see the match between temperature and air volume. Any power fan can reach 350 degrees. But when
the air volume is reduced and the heating power is constant, the greater the air volume, the lower the temperature, the lower the air volume, the higher the temperature, please choose according
to the need.
classification
Item
parameter
size
Overall machine size(L×W×H)
1000×430×580mm
Diameter of the air intake
133mm
Diameter of heating body
133mm
Heat preservation layer
Material
Double layer heat preservation
heater
Name
Nickel chromium heating wire
Heat energy
9KW
Service life of heated wire
>100000h
air intake
air blower
750W
Maximum wind volume
1170m3/h
Total pressure
2140pa
Hot air exit
diameter
133/76
maximum quantity of wind
850m3/h
temperature
The highest temperature of Hot air exit
>60℃
Maximum use temperature
<395℃
Power Supply
Power demand
380V