Strength Two Line L Type Cross Arm

Steel Cross Arm Cross Arm Information Name Steel Cross Arm for Electricity Raw Material electric using steel beam Surface Hot dipped galvanized Technique Welding as drawing of client's Holes as client request Length less 6m, cutting of customzied Hole diameter 10MM-50MM Application Electricity /Steel structure Cross arm Introduce What's Cross Arm ? The cross arm is a horizontally fixed angle iron at the top of the pole, with the porcelain vault supporting overhead wires.. What's the use of Cross Arm ? The application of cross arm: Cross arm is an important part of the tower, its role is to install the insulators and fittings to support the wire, lightning lines, and make it as required to maintain a safe distance. What's kinds of Cross arm using? According to the cross arm of the force situation, the straight rod or 15 below the corner of a single cross-beam, while the corner of more than 15 degrees in the corner rod, tension rod, terminal rod, sub-rod are used double cross arm. How to install the Cross Arm? Cross arm is generally installed 300mm away from the top of the rod, the receiving end should be installed straight cross arm, angle rod, terminal rod, rod arm should be installed in the cable side. Kinds of Cross Arm Common Cross Arm Hot dipped galvanized 600g, punched holes as using, cutting and welding as client's request Two line U type Cross Arm Welding as drawing, punched holes, galvanized more than 600g for electric using. T type Cross Arm Carbon steel angle bar welding and cutting, punched holes as drawing. galvanized suitable for electric using Two line L type Cross Arm L types, two line using, galvanized, punched holes as drawing, bright surface keep dry, not rest, good for using in electricity Four line Cross Arm welding and cutting, punched holes as drawing. galvanized suitable for electric using. Four Line U type Cross Arm galvanized 600g, punched holes as using, cutting and welding as client's request. Four Line Special Cross Arm Electric low carbon steel beam welding , punched holes, as client request to produce. Strength two line L type Cross Arm Strength using of L types, two line using, galvanized, punched holes as drawing, bright surface keep dry, not rest, good for using in electricity Factory showing Our Certificate Factory showing FAQ Q1. Can I play order of less container, is that can produce and shipment to us? A: Yes, We can produce based your request quantity, Full container or LCL all can be shipment for you. Q2. Are you sure the quality for our using? A:We are common will confirmed your using and your request, If you not have drawing, our technician will made drawing to you confirmed first. Just all data, two party not have problem, we will arrange produce as your need. Q3. Are i can have a sample before produce? A: As simple process, and our factory have models, we are pleasrue to providing sample to you confirmed, that's will keep our quality suitbale for your need, also based for our long time, If your request not have models, maybe there need client first to pay the deposit, we will reduce it when produce in follow cooperation. Q4. What's your delievery time? A: Delivery time will as factory produce schedule situation, common process parts will delivery within 30days. Special process parts, we can discuss with technician and try to delivery early as client request based on good quality. Q5. Whats payment of you accepted? A: As normal, we are accepted 50% deposit, and 50% balanced after loading by T/T or L/C. This hope client can understand, because products is customization,If special process, very hard to find secondary buyers. Thanks If you have this request and not have idea to find good supplier, Hope you can give us and your company a chance, I'm can trust our process good parts and good serves for you and to building our long time cooperation relation in near future. Thanks Our Other Products