Operating Voltage Range:9 to 32 VDC Volts Non-polarized
Standby Current:≤100μA @ 24 VDC
Maximum Alarm Current (LED on: ):≤ 55mA @ 24 VDC
Operating Humidity Range:10% to 93% Relative Humidity, Non-condensing
Operating Temperature Range:14°F to 120°F (-10°C to 49°C)
Adjustable Sensitivity:1-2.5%/FT
Height:2.2˝ (55 mm) installed in Base
Diameter:4.0˝ (103 mm)
Weight:155 g
Processing Time:5-7 Days
Port:SHENZHEN
Supply Ability: 20000 Pieces Per Month
Brand Name:ANSORL
Product Features：
Operating Voltage Range: 9 to 32 VDC Volts Non-polarized
Standby Current: ≤100μA @ 24 VDC
Maximum Alarm Current (LED on: ) ≤ 55mA @ 24 VDC
Operating Humidity Range: 10% to 93% Relative Humidity, Non-condensing
Operating Temperature Range: 14°F to 120°F (-10°C to 49°C)
Adjustable Sensitivity: 1-2.5%/FT
Height: 2.2˝ (55 mm) installed in Base
Diameter: 4.0˝ (103 mm)
Weight: 5.5 oz. (155 g)
AS-SD102 smoke detectors are photo-electronic detector uses a state of-the-art optical sensing chamber. This detector is designed to provide
open area protection and to be used with most conventional fire alarm panel.
Two LEDs on each detector provide local 360° visible alarm indication. They flash every six seconds indicating that power is applied and the
detector is working properly. The LEDs latch on in alarm. LEDs will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit. The alarm can be
reset only by a momentary power interruption.
The detector that initiated the alarm condition will have its red LED and relays latched until reset by panel.
Heat detector and smoke & heat detector combine a photo electronic sensing chamber and a temperature heat detector.
