Quick Details
- Processing Time:-
- Port:-
- Supply Ability: -
- Brand Name:DeGATECH
Mist collectors and fume collectors reduce the amount of
mist, aerosols and fumes in the workplace atmosphere. They can be used for treating media streams involving combinations of liquid/vapor, or solid/vapor. Mist collectors and fume collectors are
commonly used alongside machining equipment and other devices which generate oil mists or plumes of smoke or debris during operation. Typically, they are designed either as source collectors to
capture material directly or as ambient collectors to treat air as it circulates through an environment.
DeGATECH designed a customizable mist collector portfolio that specializes in both the reliable separation of emulsion coolant
and oil mist during cutting and metal working. All the DEG-MCO, MCW & MCS Series Mist collectors include high efficiency filter media to ensure successful filtering of coolant and oil
mist.
The efficiency of media filter collectors varies depending on the filter type used. Pressure drops for these systems are usually higher than other types of mist
collectors, so power requirements are often higher. Current cartridge mist collectors are typically modular and include options for pre-filters, HEPA, activated carbon, as well as high-powered
fans that can reach as high as 18,000 cfm. Pre-filter options include:
Mist and fume collector units are often suited best for certain types of media with different particle sizes.
TYPES OF MIST COLLECTORS
DEG-MCO Series (Oil Mist
Collector)
DEG-MCW Series (Water Mist Collector)
DEG-MCS Series (Oily
smoke Collector)
Water mists have particle sizes from 2 to 20 microns, Oil mists have particle sizes from 0.8 to 5 microns, Smoke has particles ranging from 0.07 to 1.2
microns.
- Metal screens are used for
heavier dust/grit from wet grinding.
- Metal mesh is used for
most water-soluble mist.
- Polypropylene mesh
is used for most straight oil mist.
- High efficiency 1st stage is used for
oily smoke.
FEATURES
- High efficiency backward inclined centrifugal fan assembly
- Unit for individual CNC machines
- Integrated pump & HEPA options
- Two+ machines/centralized systems
- Modular (customized) design
- Modular design
- Reusable wire-mesh
filters
- Floor-accessible
maintenance
- Custom
engineered structural supports
- Inlet and
outlet transitions for duct connections
- Airflow
range from 500 CMH to 20000 CMH
- Temperature withstanding capacity range from 30 deg C to 150 Deg C
- Insulation
for high-temperature applications