FCS Mobile Type Dust Collector Fume Extractor

Standard Configuration: Firestop mesh, filter cartridge, special ash storage box Voltage: 380V 3P 50hz   Technical Principle： The dust-laden gas enters the dust collector under the action of negative pressure. When the airflow penetrates the filter cartridge, the dust is blocked by the filter cartridge and adsorbed on the outer surface of the filter cartridge. The filtered clean gas penetrates the filter cartridge and enters the upper box and passes through the filter cartridge and discharged by the fan.   Technical Feature： It can be flexibly moved to any position of the workshop, and is not restricted by the fixed point of dust generation; The equipment is equipped with universal casters to facilitate the positioning of the equipment; Under the rated treatment air volume, the dust removal rate is ≥99.9%, and the clean air discharged after treatment can be directly circulated in the workshop; The filter element type purification method, high-precision PTFE membrane filter material, high purification efficiency, low cost of consumables, no need for frequent replacement, saving environmental protection. The equipment has a built-in automatic pulse cleaning device to keep the equipment constant suction volume and constant purification capacity. The specially designed control system of the equipment is safe and stable, and is equipped with high-voltage leakage protection; Using the universal suction arm, it can hover at any position in the three-dimensional space, and easily and flexibly reach the dust-generating point in any direction in 360 degrees, so that the welding workers can work efficiently; For special conditions, the corresponding vacuum hood can be selected according to the site; After reshuffle shock absorption and noise reduction treatment, the noise of the equipment is guaranteed to be environmentally friendly. The equipment is simple to operate and easy to clean and maintain. The pollution source can be processed by mobile stand-alone or multi-station centralized processing.   Applications: metal cutting, metal welding, metal grinding, polishing, smelting, casting, sandblasting, electrostatic powder coating, pharmaceutical, plastic mixing, chemical   Specification& Parameter: Model：FCS-3000 Air Flow：3000m³/h Cleaning method: pulse cleaning Filter material: polyester fiber + PTFE film Air intake: 1 Fan negative pressure: 3000-3500 Separation efficiency: 99.9% Filter particle: 0.3μm Motor power: 2200w Filtration area: 25㎡ Life: 3000h Number of filter cartridges: 1 Suction arm: 360 degree rotating hover Suction arm length: 2000mm Suction hood diameter: 360mm Dimensions (L*W*H): 650mm*670mm*1260mm Noise: 76db Cartridge brand: imported Button element: ABB