Non-Asbestos Gasket – Adding Special Adhesives And A Little Packing

NON-ASBESTOS GASKET – GOOD ALTERNATIVE TO COMPRESSED ASBESTOS GASKET Non-Asbestos Gasket is a general purpose sheet material reinforced with high-grade asbestos- free fibers and bonded with heat-resistant nitrile rubber. It has excellent anti-stick performance on both sides. It is a good alternative to compressed asbestos gasket. The gasket is suitable for engineering, auto mobile, chemical, oil & gas, petro chemical, power generation, paper, glass & ceramic, sugar, steel, smelter, boiler, pharmaceutical, Marin and all applications where needs higher temperature and pressure resistance and where non-critical gaseous and liquid media have to be sealed off. COMMON SPECIFICATIONS Thickness (mm) 0.4–6.0 Available size (m) 1.5 × 1.6, 1.5 × 2, 1.5 × 3, 1.5 × 4, 1.5 × 6 Maximum continuous working temperature 650 °F Steam max continuous working temperature -100 °F Maximum pressure 85 bar Tensile strength (MPa) ≥ 13 Residual stress (MPa) > 22 Compressibility 6% Cold compressibility 8% Cold recovery 3% Hot creep 22% Hot recovery 2% Density (g/cm3) 1.6–2.0 Gas permeability (mL/min) <0.3 Color Black, white, red, blue, orange FEATURES Impermeability Compressibility Stress relaxation, creep resistance Resilience Temperature resistance Premium quality Excellent durability Cost effective Excellent Heat and Pressure Chemical Resistant Have good resistance to natural gases Anti stick Anti corrosion CLASSICAL APPLICATIONS Oil and gas Chemical processing Pharmaceutical equipment Sea water equipment Heat exchangers Condensers Pulp and paper industry Power generation A blue non-asbestos gasket mounted on the mechanical seals. In mechanical seals   A green non-asbestos gasket mounted on the flange.